The system has been designed to enable the picking surface to be changed very quickly.

Flexible Feeding – Greater Speed

| Asyril SA

 

The combination of Asyril’s 3-axis vibration “Asycube” flexible feeder and structured plates (grooves, holes, etc.) offers a significant increase in the speed and precision for flexible feeding as well as pick & place applications. Traditionally, feeding components into automation machines is very often carried out by bowl feeders, for which the changeover from one batch to another is generally long and tedious. Recently, thanks to advances in the field of computer vision, flexible feeding systems have appeared on the market. The principle is simple: components are delivered and distributed over a surface in the field of vision of a camera. The camera takes a picture, locates the components and gives this information to a manipulator, which picks them up.

Asyril has successfully introduced the Asycube family of flexible feeding systems for parts and components from <0.1 up to 50mm (<0.01 up to 2 inches) to the market. The patented technology uses vibrations in 3 dimensions (X, Y & Z axis), which allow optimal distribution of the components on the picking surface as well as targeted part orientation.

 

FASTER WITH STRUCTURED SURFACES

The system has been designed to enable the picking surface to be changed very quickly. This feature enables the surface, if necessary, to be structured differently for each component to be picked up.

By making holes or grooves on the surface and inducing an intelligently chosen vibration sequence, for example, the components can be pre- oriented. Long objects can, for example, be introduced vertically into holes, resulting in a high level of availability of components that are ready to be picked up by the robot, and allowing more time for the assembly operation.

This characteristic is essentially due to the smoothness and gentleness of the vibrations that can be induced by the Asycube. Traditional flexible feeding systems do not offer this feature.

 

CUSTOMER BENEFITS

  • A large number of different components can be fed from the same system
  • No part jamming caused by components getting stuck in the mechanical selectors of a bowl feeder
  • Very fast part changeover by simple software recipe loading
  • A large number of components is available for pick in the right orientation thanks to a structured plate

 

About Asyril
Asyril offers high performance flexible feeding systems for parts and components from <0.1 up to 50mm (<0.01 up to 2 inches) in size. Our innovative technology operates geometry-independent, allows for extremely gentle part feeding and has proven to be highly cost-effective, satisfying countless internationally renowned customers for many years.

 


Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

BLE2 Series Brushless Motor & Driver

BLE2 Series Brushless Motor & Driver

The BLE2 Series replaces our popular BLE Series and continues our brushless motor advantages by featuring an all new compact, high-power and high-efficiency brushless DC motor combined with a Driver that can be digitally set and controlled via external DC voltage or by the front panel. The BLE2 Series can easily compete with larger 3-phase inverter driven motors in many more applications, with built-in simple holding torque function, saving space and increasing performance thanks to the advantages of a brushless motor design. The BLE2 Series has a maximum speed of 4000 r/min, achieving a speed ratio of 1:50 (80 to 4000 r/min). The new motor structure is small than previous models and enables high power and high efficiency while incorporating easy setting, installation and wiring. The new motor connector offers IP66 degree of protection and allows for easy and direct connection between motor and driver with two available orientation of cable outlet direction. Standardized use of stain