Looking at robots I wanted something adaptable, flexible and quick to set up. We could have gone down the route of engineering our own solution to hold the parts, but this was an off the shelf unit interfaced to our machine with an automatic door, and it just does it all.

Oasis - Engineering Success With People and Automation
Oasis - Engineering Success With People and Automation

Case Study from | Halter CNC Robotics

Here at Oasis we’re a close knit, dedicated and experienced team. Each employee has a diverse professional background that contributes significantly to our innovative engineering firm. In the past couple of years we’ve had significant growth, development of new products and employed new staff to the Production, Product Development and Assembly Departments.

 

We also have two new starters that everyone is watching closely (and have an opinion on). Roxanne and Kiki are ‘HALTER LoadAssistant Universal 20kg’ Payload Robotic Systems for CNC machine automation. They connect to new or existing CNC lathe or milling machines. Operating them is intuitive via the HMI (Human Machine Interface) screen and the process is quick – you can set up a new programme in approx 10min and the robot will be loading parts after 30min.

 

“Looking at robots I wanted something adaptable, flexible and quick to set up. We could have gone down the route of engineering our own solution to hold the parts, but this was an off the shelf unit interfaced to our machine with an automatic door, and it just does it all. You do pay more for an engineered solution like this, but it’s much more flexible. Within three days they were consistently making parts.” Mark Swetman, Oasis Engineering Workshop Supervisor.

 

Roxanne and Kiki provide Oasis Engineering with increased productivity by running overnight unmonitored. During the day they also provide flexibility because unlike humans, they don’t need to take breaks so their machinist is released to concentrate on other tasks. By applying automated engineering to the factory floor, companies enable a shift from the traditional manufacturing model to a more flexible production line.

 

The CNC Machinist working with the robot will set the new programme and monitor functions like tool load monitoring and they can also switch over to extra ‘sister’ tooling to increase production. The machinist will watch closely for any weakness, whether it be the tooling, swarf build up in the jaws or the part, or consistency in holding tolerances and they will alter the programme accordingly to ensure reliability. Parts are therefore more consistent and generally of a higher quality because the Machinist has spent the initial time to ensure the process is robust.

 

The two team members using the robotic arms adapt the programmes for consistency and find the operation of the whole screen interface – HMI is simple and intuitive.

 

Sam McAulay has been using Roxanne since Christmas 2019 on his CNC machine and has been enjoying learning the programming part of the robotics. His machine is quite old so they’re still fine tuning the setup, but they’ve had massive gains by running it non-stop through the weekends.

 

Joe Malone has been working with Kiki since May 2019. His CNC machine previously had no automation apart from a bar feeder so when he wasn’t bar feeding they couldn’t run the machine without a team member in situ:

 

“Previously I would get the machine set up (which is the skilled part of the job), then load them manually by hand which was incredibly boring. Now I can just set the robot on it and then do more interesting stuff like machine maintenance or running the saw. It’s good experience and I’m learning a lot which is really fun. I’m always keen to learn new stuff because our industry is based on technology – you have to keep up with it or you’re left behind.”

 

In future we will continue to upskill our Oasis team and investigate further ‘off the shelf’ automation offerings that will complement our future business. We work in a progressive company that already uses other automation options such as an overhead gantry loader and Barfed Machines.

 

“We’re still going to need staff, but we want to make it so there are tools for our guys to get more out of their day, for both themselves and Oasis. That’s a challenge when you’ve got a robot doing what you need to do so I’ve encouraged them to be mindful that there’s a place for them too.” Andy Cameron, Managing Director at Oasis Engineering Ltd.

 

Robotics and automation in engineering aids Oasis Engineering in meeting Industry 4.0 and Lean Manufacturing targets. Profits increase due to improvement in production flexibility and our team members are more challenged, engaged and excited about the future of engineering. Almost half of respondents to the Annual Manufacturing Report stated that they expected production flexibility to improve because of investments in connectivity. We’re proud to be at the forefront of this.

 

The content & opinions in this article are the author’s and do not necessarily represent the views of RoboticsTomorrow

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow has offered a Camera Link frame grabbers for almost 15 years. This latest offering, our 6th generation combines the power of CoaXPress with the requirements of Camera Link 2.0. Enabling a single or two camera system to operate at up to 850 MB/S per camera, the Axion-CL family is the best choice for CL frame grabber. Like the Cyton-CXP frame grabber, the Axion-CL leverages features such as the new StreamSync system, a highly optimized DMA engine, and expanded I/O capabilities that provide unprecedented flexibility in routing. There are two options available; Axion 1xE & Axion 2xE. The Axion 1xE is compatible with one base, medium, full or 80-bit camera offering PoCL, Power over Camera Link, on both connectors. The Axion 2xE is compatible with two base, medium, full or 80-bit cameras offering PoCL on both connectors for both cameras. The Axion-CL is a culmination of the continuous improvements and updates BitFlow has made to Camera Link frame grabbers.