Low-cost Spring Applied Brakes for Servo and Stepper Motors
Inertia Dynamics type FSB brakes are designed to decelerate or hold inertial loads when the voltage is turned off. These brakes can be mounted to a bulkhead or motor.
Inertia Dynamics type FSB brakes are designed to decelerate or hold inertial loads when the voltage is turned off. These brakes can be mounted to a bulkhead or motor.
The FSB brakes are rated up to 100 Lb-in static torque, and fit motors up to 5.3" OD.
Features of FSB Spring Applied Brakes:
· 12V, 24V, 90VDC or 120VAC windings
· Static torque to 100 lb-in
· Bore sizes from 1/4" to 3/4"
· Low current consumption
· Low cost
· Metric bores & special voltages available
Click on http://www.servo2go.com/product.php?ID=100508&cat= for more information on the Spring Applied Brakes from Inertia Dynamics.
For more information, please contact:
EDITORIAL CONTACT:
Warren Osak
warren@servo2go.com
Toll Free Phone: 877-378-0240
Toll Free Fax: 877-378-0249
www.servo2go.com
Tags: Inertia Dynamics, FSB Series, Spring Applied Brake, Servo2Go
Featured Product
BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion
BitFlow has offered a Camera Link frame grabbers for almost 15 years. This latest offering, our 6th generation combines the power of CoaXPress with the requirements of Camera Link 2.0. Enabling a single or two camera system to operate at up to 850 MB/S per camera, the Axion-CL family is the best choice for CL frame grabber. Like the Cyton-CXP frame grabber, the Axion-CL leverages features such as the new StreamSync system, a highly optimized DMA engine, and expanded I/O capabilities that provide unprecedented flexibility in routing. There are two options available; Axion 1xE & Axion 2xE.
The Axion 1xE is compatible with one base, medium, full or 80-bit camera offering PoCL, Power over Camera Link, on both connectors. The Axion 2xE is compatible with two base, medium, full or 80-bit cameras offering PoCL on both connectors for both cameras.
The Axion-CL is a culmination of the continuous improvements and updates BitFlow has made to Camera Link frame grabbers.
