Autonomous Vehicle Developed for Surveying Assault-Zone Runways

TORC Robotics develops autonomous system capable of surveying expedient runways for Air Force Research Labs, in collaboration with Tec^Edge and MDA Corp.

TORC Robotics recently demonstrated an autonomous vehicle for Air Force Research Labs (AFRL) capable of performing expedient runway surveys, including taking soil hardness measurements, providing terrain data and reporting hazards to flight. The Robotic Assault Zone Terminal Evaluation Kit (RAZTEK), developed by TORC, AFRL, and Tec^Edge, consists of TORC unmanned vehicle conversion kits and a Mosquito soil sampling device from MDA Corporation installed on a Lightweight Tactical All-Terrain Vehicle (LTATV). The RAZTEK system automates the surveying and sample collection processes, reducing risk on assault-zone survey missions while collecting higher quality data.


Survey teams currently carry all of the necessary equipment along open runway areas. This labor-intensive process leaves them vulnerable to the many inherent risks of extended exposure times with limited situational awareness. The semi-autonomous process of surveying expedient runways with RAZTEK robotic systems offers a much faster, safer, more accurate means to gather the necessary data for assessing potential assault-zone landing strips.

The robotic system conducts survey missions during day and night conditions. While an operator control unit, running FalconView-based mapping software, plans and enacts the survey missions, RAZTEK also provides tele-operation capability for remote control of the system from standoff locations. The converted vehicle maintains its original capabilities and allows for optionally manned operation.

For the initial RAZTEK system, the customer-selected mobility platform is up-fit with TORC's ByWire™, Tele-Op, and Autonomy unmanned ground vehicle kits, configured to meet the required mission-specific behaviors. TORC technology interfaces with modular mission payloads, such as the Mosquito, to further automate the mission.

The RAZTEK system has undergone two limited technical assessments (LTA) in the last six months with a final demonstration and delivery to AFRL scheduled for May. Contact TORC to learn more about RAZTEK and how its autonomous vehicle kits were used to rapidly develop the system.

ABOUT TORC Robotics

TORC enables engineers to rapidly integrate robotic systems through a suite of modular, customizable products. Leading academic, commercial and government organizations use the TORC Robotic Building Blocks™ product line to shorten the development process, lower costs and mitigate risks. These products are used on more than 100 mobile robots ranging from 15 pounds to 15 tons. TORC provides solutions for drive-by-wire conversion, emergency stop, power management, autonomous navigation and operator control. For more information, visit http://www.torcrobotics.com.

Featured Product

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow has offered a Camera Link frame grabbers for almost 15 years. This latest offering, our 6th generation combines the power of CoaXPress with the requirements of Camera Link 2.0. Enabling a single or two camera system to operate at up to 850 MB/S per camera, the Axion-CL family is the best choice for CL frame grabber. Like the Cyton-CXP frame grabber, the Axion-CL leverages features such as the new StreamSync system, a highly optimized DMA engine, and expanded I/O capabilities that provide unprecedented flexibility in routing. There are two options available; Axion 1xE & Axion 2xE. The Axion 1xE is compatible with one base, medium, full or 80-bit camera offering PoCL, Power over Camera Link, on both connectors. The Axion 2xE is compatible with two base, medium, full or 80-bit cameras offering PoCL on both connectors for both cameras. The Axion-CL is a culmination of the continuous improvements and updates BitFlow has made to Camera Link frame grabbers.