Dunkermotor Releases New ServoTube Linear Motors and Actuators Catalog

1,346 Standard Configurations of Linear Motors, Actuators, Modules and Gantries for Motion Control and Pneumatic Cylinder Replacement Detailed in New 24-Page Catalog

Elgin, IL -- October 1, 2012 -- Dunkermotor, now part of AMETEK Precision Motion Control, has released its first ServoTube linear motors and actuators catalog with technical specifications and drawings that cover 1,346 standard product configurations of tubular linear motors, actuators, modules, components and gantries.


With their high speed, acceleration and precision, coupled with very low noise, easy installation and no maintenance design, ServoTubes have wide application in packaging, automation and specialty machinery applications. The stainless steel washdown models are designed for use in food processing, pharmaceutical and medical applications.

Comprised of just two parts, a rod and a forcer, the ServoTube linear motor is inherently simple and elegant. The stainless steel rod is filled with rare-earth magnets and the forcer incorporates a series of coils energized as three-phase windings. The forcer coil magnetic field interacts with the rod magnetic field, generating linear force.

In the unique ServoTube design, the magnetic forces are balanced, and motion is smooth and cogging-free as opposed to flat-bed linear motors. The innovative ServoTube forcer coils optimize use of the magnetic field and feature a built-in heat sink that offers improved thermal efficiency over conventional U-channel linear motors.

The Dunkermotor linear product line is based on three shaft diameters: 11, 25 and 38 mm (0.433, 0.984 and 1.496 in.) The compact ServoTube motors offer peak force up to 1860 N (418 lbs.), with continuous force to 293 N (65.8 lbs.) A water-cooled option on the stainless steel hygienic washdown version increases continuous force to 498 N (111.9 lbs.) Maximum speed is 9.3 m/s (366 in./sec.) with acceleration up to 586 m/s2 (59.75 g). Stroke lengths range from 14 to 1751 mm (0.55 to 68.93 in.)

The speed and dynamic response of the ServoTube offers significantly increased throughput over ballscrew drives and the food-safe internal dry bearings built into the tubular actuators have a rated lifetime ten times that of a ballscrew. The non-contact construction of the ServoTube is maintenance-free and disperses no lubricants. Its direct drive simplicity eliminates couplings, belts, pulleys and gearboxes; thereby minimizing machine footprint, eliminating downtime and reducing cost of ownership.

In addition to a convenient Selection Guide, the new 24-page catalog features:

*ServoTube Moving-Rod Linear Motor Actuators with standard integrated positioning sensors for ±12 micron repeatability and ±350 micron absolute accuracy for motion control and simple drop-in pneumatic cylinder replacement

*High Rigidity Moving-Rod ServoTube Actuators for applications subject to lateral loading

*Hygienic Washdown ServoTube Stainless Steel Actuators with severe duty IP69K protection and optional water-cooling for doubled actuator force in the same space

*Compact ThrustTube Actuators for use with external encoders for micron and sub-micron positioning accuracy with no cogging

*Integrated ServoTube Moving-Forcer Modules with optional high resolution encoders, bearing rail, limit switches and/or protective bellows for easy "drop in" installation

*ServoTube Gantry Systems for multi-axis positioning to reduce automation project risk through single source calibrated systems with predictable, proven performance

"Traditional linear motors require a costly linear encoder, necessitating careful alignment during installation. With the ServoTube linear motor's sinusoidal magnetic field design, Hall sensors in the forcer can provide position information with repeatability of 12 microns, thereby eliminating the need for a linear encoder," notes Will Vinson, Dunkermotoren USA president.

"Compared to other tubular linear motors, the ServoTube is unique in that it develops a very constant force, which provides a number of benefits in terms of the quality of motion as well as an ease in tuning, all while not requiring proprietary drive electronics."

The new Dunkermotor Linear Motors and Actuators Catalog can be downloaded from the company's website at http://www.dunkermotor.com/data/downloads/catalogs/en/1208%20Katalog%20DLS.pdf. Hard copies are available by emailing a request with name, company and address to info@dunkermotor.com.

About Dunkermotor

Dunkermotor is the North American go-to-market name for Dunkermotoren GmbH, now part of AMETEK Precision Motion Control. Recognized since 1950 as the global quality and value leader in customized, configurable sole-source fractional horsepower motion control solutions, Dunkermotoren's product line consists of linear motors and rotary BLDC, PMDC and AC electric motors, gearmotors, controls, encoders and brakes.

Dunkermotoren produced over 3.4 million motors in 2011 for the factory and commercial automation, medical, packaging, specialty machinery, semiconductor, solar power and mass transportation industries. It was acquired in May 2012 by AMETEK, Inc., a leading global manufacturer of electronic instruments and electromechanical products with annual sales of more than $3.0 billion.

Dunkermotoren is now part of AMETEK Precision Motion Control, a division of AMETEK's Electromechanical Group. .Other AMETEK Precision Motion Control brands include HAYDON KERK linear actuators, rails, guides & splines, drives, motors; NAUTILAIR variable-speed brushless DC combustion blowers; PITTMAN® brush and brushless motors, gearboxes, encoders, drives, brakes; ROTRON® regenerative blowers, transportation blowers, motors, fans, pumps; and WINDJAMMER® variable-speed brushless DC blowers.

Featured Product

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow has offered a Camera Link frame grabbers for almost 15 years. This latest offering, our 6th generation combines the power of CoaXPress with the requirements of Camera Link 2.0. Enabling a single or two camera system to operate at up to 850 MB/S per camera, the Axion-CL family is the best choice for CL frame grabber. Like the Cyton-CXP frame grabber, the Axion-CL leverages features such as the new StreamSync system, a highly optimized DMA engine, and expanded I/O capabilities that provide unprecedented flexibility in routing. There are two options available; Axion 1xE & Axion 2xE. The Axion 1xE is compatible with one base, medium, full or 80-bit camera offering PoCL, Power over Camera Link, on both connectors. The Axion 2xE is compatible with two base, medium, full or 80-bit cameras offering PoCL on both connectors for both cameras. The Axion-CL is a culmination of the continuous improvements and updates BitFlow has made to Camera Link frame grabbers.