MMP Releases new 12V DC Gearmotor - 136 In Lbs torque at 140 RPM output speed

Midwest Motion Products of Watertown, Minnesota, is pleased to announce the release of a new DC Gear- Motor, Model # MMP-D33-455A-12V GP81-029 - Accepting any 12 Volt DC source, including battery power, this robust Gear Motor measures just 3.2" (max) Diameter, by 9.25" long and has a keyed output shaft of 19mm diameter by 40mm long. Easy mounting is accomplished with 4 "face mount" M6 threaded holes, equally spaced on a 65mm Dia. B.C. or an optional NEMA34 Flange, is also available. The output of this fully reversible gearmotor is rated for 136 IN-LBS continuous torque, at 140 RPM, and 1062 IN-LBS (120 Nm) Peak Torque. Despite its compact size, and weight of approximately 11 pounds, it's an efficient design, requiring just 28.6 Amps at 12 Volts DC to generate its Full-Load Torque. This translates into long battery charge, very LOW-NOISE operation, and lower cost drive electronics. Motor windings for 18v, 24v, 28v, 36v, 42v, 48v, 60v & 90 Volts are available.

FOR IMMEDIATE RELEASE: NEW 12 VOLT, PLANETARY DC GEARMOTOR

"Compact & Lightweight yet Powerful Unit provides benefits for Mobility Equipment, Robotics & Automation Applications"

20 July 2012: "IP-54" Sealed, High Power, 12 Vdc Gearmotor Develops 136 Lb. In. Torque at 140 RPM

Midwest Motion Products of Watertown, Minnesota, is pleased to announce the release of a new DC Gear- Motor, Model # MMP-D33-455A-12V GP81-029 - Accepting any 12 Volt DC source, including battery power, this robust Gear Motor measures just 3.2" (max) Diameter, by 9.25" long and has a keyed output shaft of 19mm diameter by 40mm long. Easy mounting is accomplished with 4 "face mount" M6 threaded holes, equally spaced on a 65mm Dia. B.C. or an optional NEMA34 Flange, is also available.
The output of this fully reversible gearmotor is rated for 136 IN-LBS continuous torque, at 140 RPM, and 1062 IN-LBS (120 Nm) Peak Torque. Despite its compact size, and weight of approximately 11 pounds, it's an efficient design, requiring just 28.6 Amps at 12 Volts DC to generate its Full-Load Torque. This translates into long battery charge, very LOW-NOISE operation, and lower cost drive electronics. Motor windings for 18v, 24v, 28v, 36v, 42v, 48v, 60v & 90 Volts are available.

• This versatile design can accommodate our Standard Failsafe Brakes, and/or Optical Encoders.
• "Power On" brake designs also available.
• This unique design is rated at an "IP 54" protection level for operation in harsh environments.
• Variable Speed can be accomplished with our fully compatible Speed Controls.

Samples are available FROM STOCK for rapid prototyping needs. Contact our Sales Offices for immediate prototype Shipments.

Typical options available from the company include:
• Servo Motors with integral Optical Encoders
• Failsafe Brakes, Power-On Brakes, Analog Tachometers
• Planetary Gearheads, with standard ratios ranging from 3:1 to 2653:1, and standard or low backlash precision gearing available.
• Motor Winding Options include 18V, 24V, 28V, 36V, 42V, 48V, 60V and 90 Volts DC.

MMP offers a variety of standard ancillary equipment including DC power supplies, DC Servomotors, PWM Servo Amplifiers, Motor Speed Controls, Linear Actuators and a wide variety of DC gear-motors.
Custom Motor Shaft and mounting configurations are also available, with volume orders.

Typical applications include Wheel Chair Lifts & Wheel Chair Ramps, Medical Patient Lifts, Solar Tracking, Battery Operated Motors & E.V. drives, Medical, Mobility / Accessibility products, Robotics & Automation including (Military) Unmanned Guided Vehicles, Semiconductor Processing Equipment, Actuators, Packaging & Labeling Machines, Woodworking & Metalworking Machines, Dynamic Displays for Tradeshows and many other applications requiring precise, powerful motion control.



For Further Information, Please contact:
Randy Cordes, Director of Sales - Midwest Motion Products, Inc.
Email: randy@midwestmotion.com
Phone: 952-955-2626 Ext. 25

Featured Product

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow has offered a Camera Link frame grabbers for almost 15 years. This latest offering, our 6th generation combines the power of CoaXPress with the requirements of Camera Link 2.0. Enabling a single or two camera system to operate at up to 850 MB/S per camera, the Axion-CL family is the best choice for CL frame grabber. Like the Cyton-CXP frame grabber, the Axion-CL leverages features such as the new StreamSync system, a highly optimized DMA engine, and expanded I/O capabilities that provide unprecedented flexibility in routing. There are two options available; Axion 1xE & Axion 2xE. The Axion 1xE is compatible with one base, medium, full or 80-bit camera offering PoCL, Power over Camera Link, on both connectors. The Axion 2xE is compatible with two base, medium, full or 80-bit cameras offering PoCL on both connectors for both cameras. The Axion-CL is a culmination of the continuous improvements and updates BitFlow has made to Camera Link frame grabbers.