Inexpensive Fiber Coupler Available for Quartz Fibers

The Way to Guide Your Laser Beam into the Fiber

LASER COMPONENTS presents a new product made inhouse: Easy to mount fiber

couplers for laser systems, facilitating the coupling of light from free-beam lasers easliy
into a quartz fiber.

Using a mounting flange, the coupler is directly attached to the laser. It is possible to
couple laser beams with a diameter of up to 10 mm into fibers with core diameters
ranging from 100 μm to 2000 μm.

Only a fine adjustment is necessary to use the whole system: Using adjustment screws,
it is possible to adjust the optics on the inside of the coupler along the x-axis and the
y-axis or to tilt them. In addition, adjusting the optics along the z-axis is done via a
knurled wheel.

The fiber coupler is suitable for the wavelength range from 400 nm to 1300 nm. The
optics on the inside can be equipped with different AR coatings: 400 nm to 700 nm,
633 nm to 1064 nm, or 800 nm to 1300 nm.

Trade Shows

enova - OPTO, Oct., 08.-10., 2013, Paris Porte de Versailles, France, Booth L9
PHOTONEX 2013, Oct., 16.-17., 2013, Ricoh Arena, Coventry, UK, Booth D20
BiOS EXPO 2014, Feb., 01.-02., 2014, The Moscone Center, San Francisco, USA, Booth 8517
Photonics West 2014, Feb., 04.-06., 2014, The Moscone Center, San Francisco, USA, Booth 517

The Company

LASER COMPONENTS is specialized in the development, manufacture, and sale of components
and services for the laser and opto-electronics industries. With sales offices in four different
countries, the company has served its customers since 1982. In-house production at six locations
in Germany, Canada, and the USA began in 1986 and is meanwhile responsible for about
half of its turnover. Currently, the family-run business employs more than 150 people worldwide.
More Information http://www.lasercomponents.com/de-en/product/fiber-coupler/

Featured Product

OCTOPUZ Robot Programming Software

OCTOPUZ Robot Programming Software

Program and simulate ALL your robots with OCTOPUZ offline software. OCTOPUZ specializes in path sensitive robotic applications such as welding, fabrication, edge following (waterjet, deburring, laser cutting), material removal (2D & 3D machining), and pick & place. Easy to learn, it directly supports paths from your favorite CAM system, has a library of over 15 different types of robot brands, can cut path generation by over 50% and is fully customizable to your unique needs. Program and simulate multiple robots simultaneously in any configuration! Responsive technical assistance from OCTOPUZ before, during and after sale via training, support and cell development make OCTOPUZ the software of choice.