5D Robotics Answers Military's Mandate for Interoperability in Future Robots

DOD's focus in age of austerity is lean, agile and flexible. 5D's intelligent behavior kits meet this need by providing common functionality on five different military robots shown at Fort Benning.

SAN DIEGO, Oct. 16, 2013 -- 5D Robotics, Inc., a robotics software company that integrates human behaviors with leading robotics hardware, understands that the future success of robots for the Department of Defense (DoD) must be built with interoperable and flexible software. The company recently demonstrated its plug and play technology at the U.S. Army Maneuver Center of Excellence Robotics Limited Demonstration Oct. 7-11 at Fort Benning, Georgia, where its Lighten the Load software kit ran successfully on five of the eight robotic systems exhibited.


Formerly the "Robot Rodeo," the invitation-only event gives commercial organizations like 5D Robotics the opportunity to showcase how technology can aid the military through a variety of live assessments in the field. It also gives high-ranking members of the DoD the chance to clarify their objectives for future robotic systems in the military.

"The DoD's focus in this new age of austerity is to be lean, agile and flexible when it comes to robots," said David Rowe, 5D Robotics CEO. "By focusing on interoperability, we're addressing the joint chiefs' concerns for cost limitations and efficiency. Plug and play software means we're increasing maintainability and overall life cycle for existing systems while building out future systems."

Because unmanned systems need to be both more capable and self-sufficient, the demonstrations focused on robots that could autonomously follow soldiers, lead soldiers and detect hazards, and navigate and avoid obstacles. "Our soldiers are strong, but no one can move fast with 120 pounds on your back," said Rowe.

The event highlighted 5D's flexible technology, demonstrating the company's interoperable software across a number of robotic platforms. With tight budget constraints, the military has a difficult task of reducing costs while continuing to innovate. Company Vice President David Bruemmer stated: "5D provides a means for the DoD to buy one control system and use it on many different platforms. It's better for everyone involved including the program manager who buys the systems and the operator who uses them."

5D Robotics believes interoperable and flexible software solutions are the best way to achieve the DoD's lighter, leaner, and lower cost robotic objectives.

David Bruemmer, 5D Robotics vice president, outlines three ways companies building robots for the DOD can achieve key objectives in the 'age of austerity':

*Be lean: Lighter equipment is a major focus for the Defense industry. New robotic systems must reduce those pounds for soldiers, without requiring additional mental input. 5D's Lighten the Load kit enables any robot platform to reduce the physical and mental work load of warfighters.

*Be agile: The DoD can no longer afford a specific robot, manufacturer, or software for a single task. Solutions must be able to work across platforms, military branches, and tasks. The 5D Robotics software is garnering increasingly more recognition because the company's software can be used on robots from five pounds to 5,000 pounds for a variety of tasks.

*Be flexible: Robotic systems must also be flexible in response to increasingly complex environments and demands. Military leaders recognize that a battle field is never sterile or perfect, so they require robots that are adaptive and responsive. For example, 5D's ultra wide band (UWB) tags enable smart navigation and adaptive motion without relying on GPS.

The 5D Lighten the Load kit was integrated onto the following five robotic platforms: the Segway SATSOR lighten the load robot, Northrop Grumman's Carry all Mechanized Equipment Landrover (CaMEL), HDT Robotics' Protector, Mesa Robotics' Armored combat Engineer Robot (ACER), and the Synbotics Mission Unmanned Ground Vehicle Squad Support (MUGV-SS) developed by DRS Technologies.

Other robotic companies participating included: Lockheed Martin, QinetiQ North America, and Boston Dynamics.

This is the third time that 5D Robotics has attended the Robotics Limited Demonstration at Fort Benning. The company will unveil its new remote hazard detection kit at Picatinny Arsenal at the end of October for U.S. Army leadership responsible for defeat of Improvised Explosive Devices.

About 5D Robotics Inc.

5D Robotics is accelerating productivity between humans and robots. The company's software and services provide real-time, reactive robotic behaviors such as obstacle avoidance, shared control, motion trajectory detection, and dynamic follow that work to dramatically increase the safety, efficiency and simplified control of robots used in the military, transportation and energy industries. 5D Robotics' proprietary, plug-and-play software is easily ported on a variety of robots and can rapidly adapt to a variety of uses, environments and situations. 5D Robotics holds 10 patents and its software applications have been rigorously assessed by the U.S. Army. www.5DRobotics.com.

Featured Product

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow has offered a Camera Link frame grabbers for almost 15 years. This latest offering, our 6th generation combines the power of CoaXPress with the requirements of Camera Link 2.0. Enabling a single or two camera system to operate at up to 850 MB/S per camera, the Axion-CL family is the best choice for CL frame grabber. Like the Cyton-CXP frame grabber, the Axion-CL leverages features such as the new StreamSync system, a highly optimized DMA engine, and expanded I/O capabilities that provide unprecedented flexibility in routing. There are two options available; Axion 1xE & Axion 2xE. The Axion 1xE is compatible with one base, medium, full or 80-bit camera offering PoCL, Power over Camera Link, on both connectors. The Axion 2xE is compatible with two base, medium, full or 80-bit cameras offering PoCL on both connectors for both cameras. The Axion-CL is a culmination of the continuous improvements and updates BitFlow has made to Camera Link frame grabbers.