Get 10% OFF Mediabistro’s Inside 3D Printing Conference on July 9-10, 2014 in Melbourne, Australia

The agenda is set to cover a range of 3D printing related topics, including multimaterial printing, aerospace technologies, the changing face of architecture, software, printing organs, and more.

 Mediabistro Inc. announced the program for the Inside 3D Printing Conference and Expo , taking place in Melbourne on July 9-10, 2014. The agenda is set to cover a range of 3D printing related topics, including multimaterial printing, aerospace technologies, the changing face of architecture, software, printing organs, and more.


Terry Wohlers, President of Wohlers Associates, will be delivering the opening keynote on July 9 titled The Next Frontier in 3D Printing. Milan Brandt, Professor of Advanced Manufacturing at RMIT University, will deliver the opening keynote on July 10 titled 3D Printing and the Future of Australian Manufacturing.

Also on the event schedule is a session titled 3D Printing in Metals: Where it's At, Where it's Going and What Australia's Doing About It! presented by John Barnes, Leader of the Titanium Technologies Theme for CSIRO, Australia's national science agency and one of the largest and most diverse research agencies in the world. Other event sessions include Designing for 3D Printing, 3D Printing and the Future (or Demise) of Intellectual Property, and more.

All Robotics Tomorrow readers will receive 10% OFF Gold Passports with code ROBO. Register now!

For complete information on Inside 3D Printing Conference and Expo, visit http://inside3dprinting.com

Featured Product

Bitflow is the leader in CoaXPress

Bitflow is the leader in CoaXPress

With the introduction of its Cyton and Karbon CXP frame grabbers, BitFlow has established itself as the leader in CoaXPress (CXP), a simple, yet powerful, standard for moving high speed serial data from a camera to a frame grabber. With CXP, video is captured at speeds of up to 6.25 Gigabits/Second (Gb/S). Simultaneously, control commands and triggers can be sent to the camera 20 Mb/S (with a trigger accuracy of +/- 2 nanoseconds). Up to 13 W of power can also supplied to the camera. All this happens over a single piece of industry standard 75 Ohm coaxial cable. Multiple CXP links can be aggregated to support higher data rates (e.g. four links provide 25 Gb/S of data). BitFlow CXP frame grabbers open the door to applications where cable cost, routing requirements and long distances have prevented the move to high resolution, high speed digital cameras. In many cases, existing coaxial infrastructure can be repurposed for CXP with very low installation costs.