Allied Motion Releases New Housed Brushless Torque Motor

Advanced CM-2600 Series Torque Motor Offers Choice of Integrated Encoder

Amherst, New York. : Allied Motion announced the immediate availability of their new CM-2600 series of housed brushless torque motors.


CM-2600 series torque motors are comprised of a high-performance brushless direct current motor, one of three types of optical encoder, and a precision bearing system all enclosed in a robust aluminum housing with an IP40 rating.

The CM-2600 motor is characterized by a very high torque-to-inertia ratio; it delivers rated torque of 0.189 Nm (26.8 oz-in) at a rated speed of 1125 rpm for a rated 22.3 watts of continuous power. The motor has a 19 mm (0.748 in.) inside diameter hollow stainless steel thru shaft (12.7 mm for the absolute encoder version). Peak torque is 0.69 Nm (97 oz-in) and no-load speed is 1900 rpm.

Models are available with the choice of an ultra-low distortion sine-cosine, a digital incremental encoder with up to 1.25 million counts per revolution, or an absolute 17-bit Gray code encoder.

CM-2600 series torque motors are specifically designed for direct-drive, high-resolution, high-speed positioning applications. Typical applications include optical instruments, multi-axis gimbal systems, scanners, and other direct-drive applications where use of a gearbox is undesirable.

For alternate or custom configurations contact Allied Motion's Amherst, N.Y. office via phone at 716-242-7535 or email inquiry@alliedmotion.com or contact any of their Solution Center locations for design assistance.

About Allied Motion: Allied Motion Technologies Inc. is a U.S. public company focused exclusively on serving the motion control market. Allied Motion is listed on the NASDAQ Stock Market; symbol: AMOT.

We design and manufacture motor and servo motion products for the commercial, industrial and aerospace and defense markets.

Allied Motion is growing both internally and through acquisition, and we intend to be a leading worldwide supplier of technically advanced motion control products to our selected market segments.

For more information, please visit www.alliedmotion.com

Featured Product

SCHUNK's New Safety Gripping System EGN

SCHUNK's New Safety Gripping System EGN

With the SLS, SOS, and STO functionalities, the SCHUNK EGN gripping system certified in accordance with DIN EN ISO 13849 enables safe human/machine collaboration. If the production process is interrupted by an emergency shut-off, the SCHUNK EGN goes into either a safely limited speed mode or a safe stop mode depending on the activated protection zone. In contrast to other solutions available on the market, the SCHUNK safety gripping system is continuously powered even in the safe operating stop so that the gripped parts are reliably held even without mechanical maintenance of gripping force. As soon as the protection zone is released, the gripper immediately switches back to the regular operating mode without the system having to be restarted.