Oriental Motor Introduces PKP Series Standard 2-Phase 1.8° and 0.9° Stepper Motor with Electromagnetic Brake
Leading the stepper motor market, now with power-off activated electromagnetic brakes
Oriental Motor is pleased to introduce our new 1.8° and 0.9° PKP Series 2-Phase stepper motor, the leading stepper motor in the market, now preassembled with new Oriental Motors Original Electromagnetic Brake.
The new PKP Series stepper motors are now available with built-in power-off activated electromagnetic brakes. When power is accidentally cut off due to unexpected events, such as a black out, the electromagnetic brake holds the load in position to prevent it from moving. When the motor is at standstill, it can be held by the electromagnetic brake. The electromagnetic brake can also be used to suppress the heat generated from the motor by switching off the motor current and using the brake as the holding function.
The new PKP Series stepper motors with Electromagnetic Brake type is available in both bipolar and unipolar configurations and in the following frame sizes: 35 mm (1.38 in.), 42 mm (1.65 in.) and 56.4 mm (2.22 in.). PKP26_ models (56.5 mm/2.22 in. frame size) comes with an 8 mm shaft.
The PKP Series with new Oriental Motor Original Electromagnetic Brake key features are:
* Pre-assembled to save time and money
* Power off activated 24 VDC
* 1.8° and 0.9° PKP motors
* Bipolar or unipolar windings
Visit our web site to learn more about the new PKP Series with Oriental Motor Original Encoders and other stepper motors at http://www.orientalmotor.com/products/stepper-motors/stepper-motor-only.html
ABOUT ORIENTAL MOTOR
Since its founding in Japan in 1885, Oriental Motor has been a world leader in motion systems. For over a century we have concentrated on technological advancement and product design improvement—an emphasis evident in the sophisticated devices we market today. Oriental Motors sales and service network is international, with offices throughout North America, Europe and Asia. Domestically, ORIENTAL MOTOR U.S.A. CORP. was established in 1978.
Featured Product
BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion
BitFlow has offered a Camera Link frame grabbers for almost 15 years. This latest offering, our 6th generation combines the power of CoaXPress with the requirements of Camera Link 2.0. Enabling a single or two camera system to operate at up to 850 MB/S per camera, the Axion-CL family is the best choice for CL frame grabber. Like the Cyton-CXP frame grabber, the Axion-CL leverages features such as the new StreamSync system, a highly optimized DMA engine, and expanded I/O capabilities that provide unprecedented flexibility in routing. There are two options available; Axion 1xE & Axion 2xE.
The Axion 1xE is compatible with one base, medium, full or 80-bit camera offering PoCL, Power over Camera Link, on both connectors. The Axion 2xE is compatible with two base, medium, full or 80-bit cameras offering PoCL on both connectors for both cameras.
The Axion-CL is a culmination of the continuous improvements and updates BitFlow has made to Camera Link frame grabbers.
