New IP69K Food Grade HMI Solution from Exor

The eTOP4FOOD has been designed and proven to solve the industry wide problem of HMI failures and less effective alternative HMI cleaning procedures. With the eTOP4FOOD no longer is the HMI required to be shielded from high temperature, high pressure cleaning.

eTOP507MFB - Designed for Food and Beverage industry with Stainless steel bezel


• NO MORE! Covering the HMI for Cleaning!
• NO MORE! Secondary Cleaning Procedures
• LESS CHANCE for Food & Beverage Product Contamination due to Manual Cleaning!
• 316 Stainless Steel Bezel
• IP69K
• Harsh Chemical Resistant
• PCAP "Glove Compatible" Touchscreen
• Food Compatible gasket and sealing compliant with FDA 21 CFR 177.2006

The eTOP4FOOD has been designed and proven to solve the industry wide problem of HMI failures and less effective alternative HMI cleaning procedures. With the eTOP4FOOD no longer is the HMI required to be shielded from high temperature, high pressure cleaning. The IP69K PCAP Touch "Glove Compatible" HMI has a 316 SS bezel and Polyester front foil resistant to the high pressure, high temperature, harsh chemical wash-down and is designed to thrive! No more covering the HMI panel during equipment cleaning! No more manual, less effective secondary cleaning procedures! And most certainly, no more HMI failures! Reduced labor, and more importantly reduced risk of product contamination from manual, secondary cleaning procedures because the HMI just isn't tough enough! eTOP4FOOD solves real problems! Features include:

• Stainless steel bezel 316/1.440l
• IP69K
• Food-compatible gasket
• Food standard sealing compliant with FDA 21 CFR 177.2006
• PCAP touchscreen, can be operated with gloves for food areas
• 7" TFT display 800x480 64K colors
• High-performance 1 GHz ARM CPU with 256 MB Flash
• Designed according to DIN EN1672-2
• Designed according to the EHEDG Guideline
• Extended temperature range (-20°C +60°C)
• 2 Host interface v.2.0, SD Card Slot, 2 Ethernet port with integrated Switch
• Serial port RS-232, RS-485, RS-422, MPI Software configurable
• Ready for integrated CODESYS PLC and I/O

Click on the link below to view the specification on Exor's IP69K Food Grade HMI-
http://www.electromate.com/assets/catalog-library/pdfs/exor-electronics/Exor_eTOP507MFB_Specsheet.pdf

For more information, please contact:

EDITORIAL CONTACT:
Warren Osak
sales@electromate.com
Toll Free Phone: 877-737-8698
Toll Free Fax: 877-737-8699
www.electromate.com

Tags: Exor, Food Grade, Operator Interface, IP69K, HMI, Operator Display, eTOP507MFB

Featured Product

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow has offered a Camera Link frame grabbers for almost 15 years. This latest offering, our 6th generation combines the power of CoaXPress with the requirements of Camera Link 2.0. Enabling a single or two camera system to operate at up to 850 MB/S per camera, the Axion-CL family is the best choice for CL frame grabber. Like the Cyton-CXP frame grabber, the Axion-CL leverages features such as the new StreamSync system, a highly optimized DMA engine, and expanded I/O capabilities that provide unprecedented flexibility in routing. There are two options available; Axion 1xE & Axion 2xE. The Axion 1xE is compatible with one base, medium, full or 80-bit camera offering PoCL, Power over Camera Link, on both connectors. The Axion 2xE is compatible with two base, medium, full or 80-bit cameras offering PoCL on both connectors for both cameras. The Axion-CL is a culmination of the continuous improvements and updates BitFlow has made to Camera Link frame grabbers.