Perception Neuron's Virtual Reality Motion Capture System Sails past its $250,000 Kickstarter Goal and announces Stretch Goals

With over half of its Kickstarter campaign completed, the world's smallest, adaptive and most affordable motion capture system has reached its funding goal and released news about its stretch goals.

For Fewer Laser Optics in a System Complex Coatings Applied on Both Sides

Coated laser optics are used to optimize the characteristics of the emitted laser beam.---- However, losses are produced at each glass surface - thus the number of optics should be reduced to a minimum.

Jenny Wu works with stratasys 3d printing to create dazzling jewelry with unique geometries and designs

Stratasys collaborates with Jenny Wu and unveils LACE, a new ready-to-wear 3D printed jewelry collection available in Autumn 2014

MVTec announces HALCON 12

Release sets new standards for machine vision---- Preview at VISION 2014 in Stuttgart

Ellipse Series, a Brand New Family of Miniature Inertial Sensors: More Accurate & Robust for the Same Budget

SBG Systems releases the Ellipse Series, a brand new product range of miniature inertial systems replacing the IG-500 Series. For the same budget, customers benefits from higher accuracy, advanced filtering and features inspired from high end inertial navigation systems.

IMTS 2014 - US Preview of VISI 21 At IMTS

North America's largest manufacturing technology exhibition - IMTS, from September 8 to 13.

High Speed Bipedal Robot Running Using High Speed Visual Feedback

From University of Tokyo:

ACHIRES is composed of high-speed vision and high-speed actuators to achieve instantaneous recognition and behavior. The similar technologies are used in our Janken (Rock Paper Scissors) Robot. High-speed vision detects the state of the biped robot including the timing of landing at 600 fps. The biped mechanism with the leg length of 14 cm is set to run in the sagittal plane. At present, the running velocity reaches 4.2 km/h. Simple control based on high-speed performance of sensory-motor system enables the biped robot to stably run without falling, unlike computationally expensive ZMP-based control which is commonly used for balance. The aerial posture is recovered to compensate for the deviation from the stable trajectory using high-speed visual feedback.

We also address a task of somersaulting. While running, the robot takes a big swing with one foot and jumps. After takeoff, both legs are controlled to curl up for high-speed rotation in the air. ACHIRES is going to be improved to push the envelope while demonstrating various biped locomotion tasks... (cont'd)

AMC Release 14 New 60A and 100A DigiFlex Performance Servo Drives

Advanced Motion Controls announces the release of 14 new 60Amp and 100Amp servo drives to the DigiFlex Performance family.

Indiegogo - Minnesota's World Fair Will Feature Innovation

From 3D printing and Xbox to robotics and digital currency, Minnesota's plans to host Expo 2023 puts our innovative culture center stage. Wendy Meadley, communications lead for Expo 2023: The Minnesota World's Fair, invites Minnesota state fair attendees to stop by the booth and experience 3D printing, and Bitcoin's digital currency first hand.

IMTS 2014 - 3D Systems to Highlight Latest Breakthroughs in Advanced Manufacturing at IMTS 2014

Presentation by Avi Reichental, President and CEO of 3DS, on the Impact of End-to-End 3D Design-to-Manufacturing Solutions---- Live Demonstration of Industrial Grade Metal 3D Printing at Production Scale Throughout the Event---- Competitive Advantages of Integrated Digital Thread Workflow for SLS and SLA Advanced Manufacturing Use Cases

Techmanity Summons Silicon Valley's Most Dangerous and Disruptive Startups for its 'Startlandia' Exhibit

Silicon Valley's first official technology conference, is welcoming start up teams to apply for free demo kiosks in its Startlandia exhibit space at the San Jose Convention Center Oct. 1-2.

TWELVE UK HOSPITALS ENJOY REDUCED SURGICAL PROCEDURE TIMES AND DECLINE IN COSTS BY IMPLEMENTING STRATASYS 3D PRINTING SOLUTIONS

UK medical 3D printing specialist, Replica 3DM, supports NHS hospitals with surgery validation using its Stratasys Objet24 and Objet30 Pro 3D Printers ---- Performing surgery on 3D printed models prior to operations reduces theatre costs and anesthetics times; improves patient recovery and provides an effective aid for both patient and surgeon

3D Printing Startup Becoming 3D, Launched by Grant Sadowski, Hewlett Packard Elite Partner

Industry veteran is applying his years of traditional print expertise to the emerging 3D printing market.

U.S. Army's eCYBERMISSION Kicks Off 13th Year of Competition

Register Now for 2014-2015 STEM Competition; Students Imagine Innovative Solutions to Real-World Challenges that Could Build a Better Future

Advanced Motion Controls Release 14 New 60A and 100A DigiFlex Performance Servo Drives

All DigiFlex® digital servo drives can operate brushed and brushless servomotors, and voice coils

Records 1366 to 1380 of 1588

First | Previous | Next | Last

Personal & Service Robots - Featured Product

ST Robotics - r12 robot arm

ST Robotics - r12 robot arm

ST Robotics have decades of experience in industrial robots having sold hundreds of robots over the years. The company has 3 main models, R12, R17 and R19 all using a unique simple industrial technology that dramatically reduces costs resulting in the lowest priced industrial robots available. The same uncomplicated technology vastly improves reliability. ST backs this up with a 2 year warranty. Typical applications are routine testing, sample handling and also education. The software is a different paradigm from most robots. It is command based; you type a command and see immediate action. Programming is a building block approach, building confidence as you program in small 'mind-sized bytes'. ST offers free unlimited technical support.