New, Low Cost Right Angled DC Gearmotor now available from MMP!

Midwest Motion Products Inc., with Manufacturing and Office Facilities now based in Howard Lake, Minnesota, is pleased to announce the release of the new "TM57-GRA52" Right Angled Gearmotor System. This new 1:1 Right Angled Gearbox allows for significantly increased versatility, and design whose geometry allows for the unit to be mounted in tight spaces.

CLEARPATH ROBOTICS ANNOUNCES MOBILITY SOLUTION FOR RETHINK ROBOTICS' BAXTER ROBOT

Clearpath Robotics announced the newest member of its robot fleet: an omnidirectional development platform called Ridgeback. The mobile robot is designed to carry heavy payloads and easily integrate with a variety of manipulators and sensors. Ridgeback was unveiled as a mobile base for Rethink Robotics' Baxter research platform at ICRA 2015 in Seattle, Washington.  "Many of our customers have approached us looking for a way to use Baxter for mobile manipulation research - these customers inspired the concept of Ridgeback. The platform is designed so that Baxter can plug into Ridgeback and go," said Julian Ware, General Manager for Research Products at Clearpath Robotics. "Ridgeback includes all the ROS, visualization and simulation support needed to start doing interesting research right out of the box."  Ridgeback's rugged drivetrain and chassis is designed to move manipulators and other heavy payloads with ease. Omnidirectional wheels provide precision control for forward, lateral or twisting movements in constrained environments. Following suit of other Clearpath robots, Ridgeback is ROS-ready and designed for rapid integration of sensors and payloads; specific consideration has been made for the integration of the Baxter research platform.

Google Virtual Reality at IMMERSION 2015 in Paris this September

Google Virtual Reality (VR) to be featured in talks, exhibits, demos and hands-on workshops at IMMERSION 2015 in Paris this September

KUKA Systems Commercializes New PULSE Line Technology

PULSE technology is extremely fast and flexible - 30% faster than conventional friction-based transfer systems.

April Equity Deals, Acquisitions and Chinese Funds

Money is flowing to robotics-related startup companies. Q1 saw 19 equity deals totaling $317 million, and 3 acquisitions of undetermined amounts, but money also flowed in April.

CLEARPATH ROBOTICS ANNOUNCES MOBILITY SOLUTION FOR RETHINK ROBOTICS' BAXTER ROBOT

Ridgeback Development Platform gives legs wheels to Baxter and other stationary manipulators

Adept Technology Receives 1 Million Dollar Order for Lynx Mobile Robots

The customer is Techmetics Solutions, an automation solutions provider to the hospitality, food and beverage industry in Southeast Asia.

NYU Engineering Student Earns Prestigious NSF Fellowship for Wearable-Robot Research

Henry Clever Hopes His Mathematical Equations Will Someday Deliver Energy-Efficient Exoskeletons to Give People with Disabilities a Natural Gait

Museum of Science and Industry, Chicago Features Festo Bionics in New Robotics Exhibit

Robot Revolution, supported by Google.org, premieres May 21 in Chicago and will then tour the nation.

Paralyzed man can now use his mind to shake hands, drink beer using robotic arm

A man paralyzed by gunshot more than a decade ago can shake hands, drink beer and play "rock, paper, scissors" by controlling a robotic arm with his thoughts, researchers reported.   Two years ago, doctors in California implanted a pair of tiny chips into the brain of Erik Sorto that decoded his thoughts to move the free-standing robotic arm. The 34-year-old has been working with researchers and occupational therapists to practice and fine-tune his movements.   It's the latest attempt at creating mind-controlled prosthetics to help disabled people gain more independence. In the last decade, several people outfitted with brain implants have used their minds to control a computer cursor or steer prosthetic limbs.   Full Article:

JBM, now an official reseller for OCTOPUZ in Japan

In-House Solutions is pleased to announce that JBM, the world's top Mastercam dealer, has signed on as an official reseller of OCTOPUZ software in Japan.

Kickstarter - Start Your Rotors - C-mi is a Drone for Everyone

C-mi's Kickstarter Success has been supported with advance purchases of this superior quality drone at well below market pricing.

Composites and Robotmaster

Singularity, calibration, collisions, reach limitations, and motion granularity are uniquely complex to robotic systems and can make programming particularly cumbersome. For the past few years, Robotmaster (Jabez Technologies) has been responding to the growing demand for the robotized manufacturing of composites.

Simulating Clearpath Robots In Maplesim

If your robotics research depends on accurate models, you may want to consider looking at MapleSim® 2015 - a high performance physical modeling and simulation tool developed by Maplesoft™.

Mohamed Bin Zayed International Robotics Challenge Releases Competition Details

The inaugural 2016 competition will consist of three Challenges and a triathlon type "Grand Challenge.

Records 1636 to 1650 of 6547

First | Previous | Next | Last

Industrial Robotics - Featured Product

Universal Robots - Collaborative Robot Solutions

Universal Robots - Collaborative Robot Solutions

Universal Robots is a result of many years of intensive research in robotics. The product portfolio includes the UR5 and UR10 models that handle payloads of up to 11.3 lbs. and 22.6 lbs. respectively. The six-axis robot arms weigh as little as 40 lbs. with reach capabilities of up to 51 inches. Repeatability of +/- .004" allows quick precision handling of even microscopically small parts. After initial risk assessment, the collaborative Universal Robots can operate alongside human operators without cumbersome and expensive safety guarding. This makes it simple and easy to move the light-weight robot around the production, addressing the needs of agile manufacturing even within small- and medium sized companies regarding automation as costly and complex. If the robots come into contact with an employee, the built-in force control limits the forces at contact, adhering to the current safety requirements on force and torque limitations. Intuitively programmed by non-technical users, the robot arms go from box to operation in less than an hour, and typically pay for themselves within 195 days. Since the first UR robot entered the market in 2009, the company has seen substantial growth with the robotic arms now being sold in more than 50 countries worldwide.