Liquid Robotics Closes on $45M Series E

Liquid Robotics is a maker of autonomous ocean robots and ocean data services.

DARPA Seeks More Robust Military Wireless Networks

Wireless Network Defense program seeks to develop new technologies to help make wireless networks more resilient to unforeseen scenarios and malicious compromise

Intelligrated acquires Datria, a provider of innovative voice-enabled software solutions

Acquisition supports the increasing need for real-time, mobile-enabled distribution and fulfillment operations

New ElectroCraft AxialPower Plus and L3 Linear Actuators

Try the L3 linear actuators with applications needing a little more force.

GstarCAD MC Received Complimentary Reviews among Overseas Users

As a mobile CAD program of the new age, GstarCAD MC is becoming the milestone of overseas marketing which GstarCAD was expecting by users. GstarCAD received high acclaim since it accessed overseas market, and the downloads were at records high.

Low Cost Hobbyists FPGA Kickstarter

If you have been thinking of dipping your toe into the world of FPGAs (field-programmable gate arrays) but always thought they were too expensive for hobbyist then you might want to check out the 'Mojo FPGA' on Kickstarter.

The Mojo is designed to make digital design easy and cost effective for anyone who is just getting started. FPGAs do not retain their configuration when the power is lost, so they must be reconfigured every time the board is turned on. Typically, a PROM is used to load the configuration file (also known as bit file) into the FPGA automatically. The problem with that is you generally need a fairly expensive programmer to program the PROMs. The Mojo features a basic serial port (similar to an Arduino) that can be used to program a new bit file into on-board flash memory. When the board is powered on, a microcontroller reads the flash memory and configures the FPGA automatically. All that is required is a low-cost USB to serial converter.

The original Kickstarter goal was 7,000 but they blew through that goal and are currently at 70,000. If you pledge $65 dollars you get a fully assembled board.

Case Study: Robot for tool production company with 10 employees

The acquisition cost for the entire system including imaging will have paid itself off in only 10 months with single shifts. If the robot is used for 2 shifts, it will actually have paid itself off in only seven months.

Robotics In Law Enforcement

Soon, the police won't have to draw their guns. They will be able to just push buttons and move joysticks to capture the bad guys.

Case Study: Kawasaki Robotics Upgrade Project Proves Successful

The Kawasaki Robotics project on the existing robotics paint system consisted of upgrading two Kawasaki robots and replacing four Kobelco robots with new Kawasaki robots.

Join the New LinkedIn Group 'Motion Control Fundamentals'

Created by Electromate.com, this New LinkedIn Technical Group strives to advance the knowledge of the fundamentals of Electro-mechanical Motion Control.

New ElectroCraft AxialPower Plus and L3 Linear Actuators

Based on modified hybrid stepping motors, ElectroCraft's New AxialPower Plus linear actuators are capable of producing linear forces up to 800 pounds and resolutions up to 0.000125" per 1.8° step.

Sagetech Corporation Achieves Coveted AS9100C Certification

Avionics innovator Sagetech Corporation today announced that it has been awarded certifications for both AS9100C and ISO 9001:2008 standards. These certifications signify Sagetech's successful compliance with recognized quality management systems, including the rigorous AS9100C aerospace quality standard.

TE Connectivity Makes New Connection with the Launch of "ARISO Contactless Connectivity" Platform Providing Power, Data and Signal Without a Physical Connection

Industry leader brings 60 years of innovation and a new way of thinking to connectivity challenges.

Industrial Magnetics, Inc. Extends Line of Transporter® LP Magnetic End-of-Arm Tooling

Industrial Magnetics, Inc. has expanded their line of Transporter® LP magnetic end-of-arm tooling, designed to magnetically transfer metal blanks, stampings & parts in automated station-to-station, press-to-press transfer and robotic pick-and-place applications.

Army, Academics Cite Progress on UAS, but Challenges Remain

Also includes developing counter-UAS defenses for the day when enemies also use unmanned aircraft to gather intelligence.

Records 4396 to 4410 of 6287

First | Previous | Next | Last

Industrial Robotics - Featured Product

Midwest Motion Products Inc - “GRA52” Right Angled Gearmotor System

Midwest Motion Products Inc - "GRA52" Right Angled Gearmotor System

Midwest Motion Products Inc., based in Howard Lake, Minnesota, is pleased to announce the release of the new "GRA52" Right Angled Gearmotor System. This new 1:1 Right Angled Gearbox allows for significantly increased versatility, and design whose geometry allows for the unit to be mounted in tight spaces. We employ our Standard Brushed or Brushless DC Motors and Planetary Gearheads to complete the new R/A Design. Features/Benefits: Cost effective design - as low as $250*, Very Versatile - Output Ratios ranging from 3.7:1 to 2076:1, Fully Reversible Design, Readily available - Samples can be built from Stock Material, High Volume capacity.