Try the L3 linear actuators with applications needing a little more force.
As a mobile CAD program of the new age, GstarCAD MC is becoming the milestone of overseas marketing which GstarCAD was expecting by users. GstarCAD received high acclaim since it accessed overseas market, and the downloads were at records high.
If you have been thinking of dipping your toe into the world of FPGAs (field-programmable gate arrays) but always thought they were too expensive for hobbyist then you might want to check out the 'Mojo FPGA' on Kickstarter . The Mojo is designed to make digital design easy and cost effective for anyone who is just getting started. FPGAs do not retain their configuration when the power is lost, so they must be reconfigured every time the board is turned on. Typically, a PROM is used to load the configuration file (also known as bit file) into the FPGA automatically. The problem with that is you generally need a fairly expensive programmer to program the PROMs. The Mojo features a basic serial port (similar to an Arduino) that can be used to program a new bit file into on-board flash memory. When the board is powered on, a microcontroller reads the flash memory and configures the FPGA automatically. All that is required is a low-cost USB to serial converter. The original Kickstarter goal was 7,000 but they blew through that goal and are currently at 70,000. If you pledge $65 dollars you get a fully assembled board.
The acquisition cost for the entire system including imaging will have paid itself off in only 10 months with single shifts. If the robot is used for 2 shifts, it will actually have paid itself off in only seven months.
Soon, the police won't have to draw their guns. They will be able to just push buttons and move joysticks to capture the bad guys.
The Kawasaki Robotics project on the existing robotics paint system consisted of upgrading two Kawasaki robots and replacing four Kobelco robots with new Kawasaki robots.
Created by Electromate.com, this New LinkedIn Technical Group strives to advance the knowledge of the fundamentals of Electro-mechanical Motion Control.
Based on modified hybrid stepping motors, ElectroCraft's New AxialPower Plus linear actuators are capable of producing linear forces up to 800 pounds and resolutions up to 0.000125" per 1.8° step.
Avionics innovator Sagetech Corporation today announced that it has been awarded certifications for both AS9100C and ISO 9001:2008 standards. These certifications signify Sagetech's successful compliance with recognized quality management systems, including the rigorous AS9100C aerospace quality standard.
TE Connectivity Makes New Connection with the Launch of "ARISO Contactless Connectivity" Platform Providing Power, Data and Signal Without a Physical Connection
Industry leader brings 60 years of innovation and a new way of thinking to connectivity challenges.
Industrial Magnetics, Inc. has expanded their line of Transporter® LP magnetic end-of-arm tooling, designed to magnetically transfer metal blanks, stampings & parts in automated station-to-station, press-to-press transfer and robotic pick-and-place applications.
Also includes developing counter-UAS defenses for the day when enemies also use unmanned aircraft to gather intelligence.
DARPA's ICECool seeks to demonstrate intrachip/interchip microfluidic cooling
27 April 2012: "IP-54" Sealed, High Power, 48 Vdc Gearmotor Develops 18 Lb. In. Torque at 782 RPM Midwest Motion Products of Watertown, Minnesota, is pleased to announce the release of a new DC Gear- Motor, Model #: MMP-D33-455D-48V GP81-03.7 - Accepting any 48 Volt DC source, including battery power, this robust Gear Motor measures just 3.2" (max) Diameter, by 8.4" long and has a keyed output shaft of 19mm diameter by 40mm long. Easy mounting is accomplished with 4 "face mount" M6 threaded holes, equally spaced on a 65mm Dia. B.C. or an optional NEMA34 Flange, as shown on the attached Photo. The output of this fully reversible gearmotor is rated for 18 IN-LBS continuous torque, at 782 RPM, and 354 IN-LBS Peak. Despite its compact size, and weight of approximately 10 pounds, it's an efficient design, requiring just 5.1 Amps at 48 Volts DC to generate its Full-Load Torque. This translates into longer battery charge, very LOW-NOISE operation, and lower cost drive electronics. Motor windings for 12v, 18v, 24v, 28v, 36v, 42v, 60v & 90 Volts are available.
03 Sept 2011: "IP-54" Sealed, Low Current, 12 Vdc Gearmotor Develops 136 Lb. In. Torque at 35 RPM Midwest Motion Products, Inc. of Watertown, Minnesota, is pleased to announce the release of a new DC Gear Motor, the Model No. MMP TM57-12V GP52-124. Accepting any 12 Volt DC source, including solar or battery power, this robust Gear Motor measures just 2.24" in Diameter, by 7.76" long, and has a keyed output shaft of 12mm diameter by 25mm long. Easy mounting is accomplished with 4 "face mount" M5 threaded holes, equally spaced on a 40mm Dia. B.C. The output of this reversible gearmotor is rated for 136 Lb. In. (15.3Nm) torque, at 35 RPM. Despite its compact size, and weight of approximately 4 pounds, it's an efficient design, requiring just 7.2 Amps at 12 Volts DC to generate its Full Load Torque. That translates into long life battery charge, very low noise operation, and lower costs for related drive electronics. Motor windings for 24V, 28V, 36V, 42V, 48V, 60V & 90 Volts are available. This unique design is rated at an "IP 54" protection level for operation in harsh environments. Variable Speed control can be accomplished with our fully compatible Speed Controls, Model MMP 25A-12V, or
Records 4651 to 4665 of 6539
Industrial Robotics - Featured Product
Robotmaster V6 provides a unique integration of user control, speed and flexibility to Robotmaster's renowned automation and optimization tools. The new and intuitive V6 interface elevates Robotmaster to an unprecedented standard of user experience by giving robot programmers a coherent and dynamic tool that radically saves time and money.