Exor's New eX700 series features Harsh Environment Operation
EXOR has taken the highly successful harsh environment eTOP500 series and updated it with the recently released eX700 series.
EXOR has taken the highly successful harsh environment eTOP500 series and updated it with the recently released eX700 series.
This natural progression allows you to combine a high-performance sunlight readable display with state of the art connectivity such as OPC UA.
eX700G Series combine high-performance sunlight-readable display with state-of-the-art connectivity features and top performance in a great design maintaining as a design commitment the fact that the product is likely to be used in environments where the safety of operators is at risk.
EXOR has designed the product range as Industrial IoT edge devices combining a powerful controller with networking capability and outstanding communication options including client/server OPC UA. They are the ideal choice for all demanding IIoT edge applications in extreme environments such as marine and process industries.
The glass projected capacitive touchscreen and the brilliant 7" widescreen display with a resolution of 800×480 are bonded to guarantee the highest optical performance and resistance in such environments.
As with all eX700 Series HMI products have been designed to run the JMobile software.
• JMobile runtime included. Requires JMobile V2.8 or higher
• Supports Corvina Cloud secure connectivity with full network separation
• OPC UA Server and Client
• Optional CODESYS V3 runtime with choice of EtherCAT, PROFINET, Ethernet/IP and POWERLINK
Information on the eX707G HMI from Exor can be viewed at:
https://www.electromate.com/assets/catalog-library/pdfs/exor-electronics/Exor_eX707G_Specsheet.pdf
For further information, please contact:
EDITORIAL CONTACT:
Warren Osak
sales@electromate.com
Toll Free Phone: 877-737-8698
Toll Free Fax: 877-737-8699
www.electromate.com
Featured Product
US Digital's New L2 Low Profile Motor Encoder
The L2 incremental encoder uses US Digital's proven EM1 optical encoder module and disk, which has billions of device-hours of dependable service in customer applications. This product continues US Digital's strong reputation for reliable, field-tested encoders. The L2 is US Digital's lowest height encoder that uses the EM1 module. It has a 0.75 in. bolt-spacing mount. The maximum resolution is 1250 CPR (5000 PPR with quadrature). The L2 comes with a single-ended output. Another benefit of the L2 incremental encoder is its fast installation. The cover snaps onto the base to secure the module. It is designed for use with a high-retention connector or cable (sold separately). Like all US Digital products, the L2 is designed and manufactured in Vancouver, Washington, USA. It is backed by prompt access to our technical and customer service teams with same-day shipping on most orders.
