Four steps from Prototype to mass production

EBI provides rapid prototyping service, SLS/SLA rapid prototyping, plastic injection molding. CNC rapid prototyping, low volume, on demand. no MOQ, fast delivery, free design.

Four steps from Prototype to mass production: product design, make a prototype, small batch testing, mass production.


Before doing the prototype, the designer needs to first position the market and select the appropriate product for the design. The designer will generally design drawings in various formats, CAD, PDF, Stl, STP, 3dmax and other formats; after the drawings are ready, looking for a factory to make a prototype, and the prototype proofing involved the following processes.

Programming:
Programmer analyzes the 3D drawing and writes a suitable computer program.
CNC machining:
The plastic, hardware and other plates are processed by CNC machines and become rough machining models.
Manual treatment:
Remove the rough machining models, then deburr and prepare for fine grinding.
Grinding treatment:
The processing personnel should see the drawings and pay attention to the grinding accuracy. Smooth the prototype as required.
Spraying:
Spray with various colors or silk screen highlights according to customer requirements.
Assembly:
Organized the prototype and check the tolerances, If all good, then well packaged and shipped out.

The designer will check the prototype when it arrived. If there is any problem, it is necessary to re-edit the drawing or re-sample. If there is no problem with the appearance and structure, they will next produce in small batches.
In the case of small batch production, the EBI generally chooses the vacuum casting mold, which cheaper and faster. Of course, many customers still choose CNC processing. The purpose of small batch production is to prepare for making mold and mass production.

If there is no problem with the small batch sample, the customer will start to evaluate the making mold's price and time, and arrange the first batch of formal product production.
From the beginning of the prototype to the mass production after the above four stages, the product can officially enter the market. Prototype proofing can effectively avoid the huge risk of customers directly making the mold.
EBI provides rapid prototyping service, SLS/SLA rapid prototyping, plastic injection molding. CNC rapid prototyping, low volume, on demand. no MOQ, fast delivery, free design.
RFQ please contact:
Tel: 0086-791-86372550
Fax: 0086-791-88382737
E-mail:info@ebi-part.com
Alibaba store:https://lnkd.in/ekWR_AX

Featured Product

REIKU's Cable Saver™ - The Most Versatile Modular Robotic Cable Management Solution

REIKU's Cable Saver™ - The Most Versatile Modular Robotic Cable Management Solution

REIKU's Cable Saver™ Solution eliminates downtime, loss of revenue, expensive cable and hose replacement costs, maintenance labor costs. It's available in three sizes 36, 52 and 70 mm. All of the robots cables and hoses are protected when routed through the Cable Saver™ corrugated tubing.The Cable Saver™ uses a spring retraction system housed inside the Energy Tube™ to keep this service loop out of harms way in safe location at the rear of the Robot when not required. The Cable Saver™ is a COMPLETE solution for any make or model of robot. It installs quickly-on either side of the robot and has been tested to resist over 15 million repetitive cycles. REIKU is committed to providing the most modular, effective options for ensuring your robotic components operate without downtime due to cable management. www.CableSaver.com