MDC-211-WF
Wi-Fi Modbus Data Concentrator with 1 x Ethernet, 1 x RS-232 and 1 x RS-485
Features
- Compatible with IEEE 802.11 a/b/g/n standards
- Support Infrastructure and Limit-AP mode
- Support WPA-PSK, WPA2-PSK for Wi-Fi encryption
- Support Ethernet, RS-232/485 and Wi-Fi interfaces
- Support Web-based UI Operations
- Support the Modbus TCP/RTU protocol
- Support 240 Modbus Polling Commands
- Supports 9600 Modbus Registers for DI/DO/AI/AO
Introduction
MDC-211-WF Modbus data concentrator developed by ICP DAS, with Ethernet, WiFi Wireless, RS-232 and RS-485 communication interfaces, can link the Modbus RTU devices to the Ethernet network. MDC-211-WF can read the data of Modbus RTU device according to the user-defined command table, and integrate the data of different Modbus RTU devices into the format of the continuous address so that the remote monitor host can connect to MDC-211-WF from Ethernet to access the data of multiple Modbus RTU devices at once.
Applications
Specifications
Wi-Fi | |
Standards | IEEE 802.11a/b/g/n |
Protocol | Modbus TCP Slave |
Mode | Limit-AP/Infrastructure |
Frequency | 2.4 GHz 5 GHz |
Encryption | Open/WEP/WPA/WPA2 |
Channels | 2.4 GHz: CH1~11 5 GHz: CH36, 40, 44, 48 |
Antenna | Omni-Directional 3 dBi @2.4 GHz / 5.5 dBi @ 5 GHz |
COM Ports | |
Ports | 1 x RS-232 1 x RS-485 |
Baud Rate | 1200 ~ 115200 bps |
Protocol | Modbus RTU Master/ Slave |
Polling Definition | Up to 240 Modbus command definitions for all Wi-Fi/RS-232/ RS-485 ports |
Ethernet | |
Ports | 1 x RJ-45, 10/100Base-T(X) |
Protocol | Modbus TCP Slave |
Configuration | Web-based User Interface |
Power | |
Input Range | +10 VDC ~ +30 VDC |
Mechanical | |
Casing | Metal |
Dimensions (mm) | 52 x 98 x 27 (W x L x H) |
Installation | DIN-Rail |
Environmental | |
Operating Temperature | -25 ~ +75°C |
Storage Temperature | -40 ~ +85°C |
Humidity | 10 ~ 95% RH, Non-condensing |