Low-cost Spring Applied Brakes for Servo and Stepper Motors

Inertia Dynamics type FSB brakes are designed to decelerate or hold inertial loads when the voltage is turned off. These brakes can be mounted to a bulkhead or motor.

Inertia Dynamics type FSB brakes are designed to decelerate or hold inertial loads when the voltage is turned off. These brakes can be mounted to a bulkhead or motor.


The FSB brakes are rated up to 100 Lb-in static torque, and fit motors up to 5.3" OD.

Features of FSB Spring Applied Brakes:

· 12V, 24V, 90VDC or 120VAC windings
· Static torque to 100 lb-in
· Bore sizes from 1/4" to 3/4"
· Low current consumption
· Low cost
· Metric bores & special voltages available

Click on http://www.servo2go.com/product.php?ID=100508&cat= for more information on the Spring Applied Brakes from Inertia Dynamics.

For more information, please contact:
EDITORIAL CONTACT:
Warren Osak
warren@servo2go.com
Toll Free Phone: 877-378-0240
Toll Free Fax: 877-378-0249
www.servo2go.com


Tags: Inertia Dynamics, FSB Series, Spring Applied Brake, Servo2Go

Featured Product

maxon motor’s - Exoskeleton Joint Actuator

maxon motor's - Exoskeleton Joint Actuator

A brushless DC motor solution for use in hip and knee exoskeletons. This complete joint actuation unit consists of motor, gearhead, encoder and position controller. Fitting absolute encoder directly at the joint rotation provides designers increased positioning accuracy. The unit will deliver 54Nm of continuous torque and 120Nm on a 20% duty cycle. The system can be operated on supplies between 10 and 50V DC and the actuation speed is up to 22rpm.