Novotechnik -Linear Position Sensors with Signal Conditioning
The signal conditioned output enables the TE1 Series to have long cable runs without substantial signal loss and can be connected directly to the analog input of a process controller.
Southborough, MA - Novotechnik U.S. announces the TE1 Series of absolute linear position sensors, with integrated microprocessor and associated circuitry to provide signal conditioning for a current or voltage output signal.
The signal conditioned output enables the TE1 Series to have long cable runs without substantial signal loss and can be connected directly to the analog input of a process controller.
Key specifications for the TE1 Series include 25 to 150 mm measurement range for both rod and rod with return spring versions. Resolution is unlimited and repeatability is 0.002 mm. Independent linearity is to ± 0.075% of full scale. Four output options are available: 0 to 10 V, 10 to 0 V, 4 to 20 mA and 20 to 4 mA for positive or negative slope output. Sensor life is >100 million movements.
The TE1 Series includes versions with and without return spring. Ball coupling is included for backlash- and shear force free operation. Housing profile of the TE1 Series is a compact 0.70 in (18 mm). Cable and connector versions are standard.
For more information on the TE1 Series contact Novotechnik U.S., Inc., phone: 508-485-2244 · Web: www.novotechnik.com/te1
Featured Product
US Digital's New L2 Low Profile Motor Encoder
The L2 incremental encoder uses US Digital's proven EM1 optical encoder module and disk, which has billions of device-hours of dependable service in customer applications. This product continues US Digital's strong reputation for reliable, field-tested encoders. The L2 is US Digital's lowest height encoder that uses the EM1 module. It has a 0.75 in. bolt-spacing mount. The maximum resolution is 1250 CPR (5000 PPR with quadrature). The L2 comes with a single-ended output. Another benefit of the L2 incremental encoder is its fast installation. The cover snaps onto the base to secure the module. It is designed for use with a high-retention connector or cable (sold separately). Like all US Digital products, the L2 is designed and manufactured in Vancouver, Washington, USA. It is backed by prompt access to our technical and customer service teams with same-day shipping on most orders.
