Integrated Force Control
A force"controlled robot can be programmed to mimic the movements of a human arm, applying search patterns to find the correct position to assemble a given part.
Robotic Welding Series: Alleviate Skilled Welder Shortages With Robotic Welding Cells
A robot system, fully deployed is going to give two to three-hundred percent return on investment per year.
Compliance In Motion - An Automotive Parts Application
Even 1 mm of misalignment between the robots end of arm tool and the position of the parts in the table could cause costly damage.
Six Advantages of Ethernet for Auto ID Readers
Ethernet cabling has been standardized. The cables for an Ethernet-enabled Auto ID reader are common with all standard Ethernet equipment.
Closed Loop Current Transducer Characteristics
A properly selected current transducer for an application can easily give 25+ years of service. By acknowledging the details behind the data sheet, better performing applications and more robust designs are possible.
Microscan Imagers Ensure 2D Code Readability During Manufacturing of Miniature Identifiers
Bridging the gap between ease of use and performance, the QX Hawk features a high resolution modular optical zoom system, aggressive X-Mode decoding, and simple plug and play connectivity.
ASIC Based Current Transducers
The implementation of ASIC based current transducers opens up functionality that the traditional discrete component transducers could never achieve.
After 5,000 Years, Automation Finds Its Way Into The "Lost Wax Process"
With home-grown innovation and ABB robots, MPI, Inc. has discovered the secret to incredible increases in productivity and quality for today's most competitive foundries.
Case Study: Machine Vision System Detects Defective Parts for Precision Stampings Supplier
Dimensional measurement is an essential step in the manufacture of Hexins stamped parts in order to ensure that each workpiece meets required tolerances.
Case Study: Alignment Device With On-center And Off-center Locking
The KA device's ability to lock to center and also off center is critical to this application. That ability, coupled with the devices reliability and repeatability, makes for a great solution in this application.
Machine Vision System Detects Defective Parts for Precision Stampings Supplier
With production rates of 3,200 pieces per hour for a single production line and an acceptance rate of virtually 100% required by mobile phone and hard drive manufacturers (one defective piece per 120,000), 100% inspection of the components is necessary to ensure that all orders will be accepted by the end customer.
Food Processing Without The Human Touch
Robotic sensory technology is now able to act in the same manner that a person does, adapting to the food manufacturing environment and utilizing vast amounts of information to give us some of the safest food in the world.
Case Study: Marathon Special Products; Plastic Deflashing Automation System
The system keeps up with their presses, provides a consistent finish, and alleviates their operators even from having to select the right part program.
Measurable Energy Savings in Die Casting Automation
Experience shows that it is not the robots that are the biggest energy consumers, but the entire peripheral equipment.
Survey of Control System Integrators
Nearly all automation vendors rely on system integrator partners to take some percentage of their hardware and software products to market in the form of completely functional systems.
Records 1351 to 1365 of 1373
First | Previous | Next | Last
Factory Automation - Featured Product
US Digital's New L2 Low Profile Motor Encoder
The L2 incremental encoder uses US Digital's proven EM1 optical encoder module and disk, which has billions of device-hours of dependable service in customer applications. This product continues US Digital's strong reputation for reliable, field-tested encoders. The L2 is US Digital's lowest height encoder that uses the EM1 module. It has a 0.75 in. bolt-spacing mount. The maximum resolution is 1250 CPR (5000 PPR with quadrature). The L2 comes with a single-ended output. Another benefit of the L2 incremental encoder is its fast installation. The cover snaps onto the base to secure the module. It is designed for use with a high-retention connector or cable (sold separately). Like all US Digital products, the L2 is designed and manufactured in Vancouver, Washington, USA. It is backed by prompt access to our technical and customer service teams with same-day shipping on most orders.
Robotics and Automation - Featured Company
MVTec LLC
MVTec is a leading international manufacturer of software for machine vision used in all demanding areas of imaging like the semi-conductor industry, inspection, optical quality control, metrology, medicine or surveillance. In particular, software by MVTec enables new automation solutions in settings of the Industrial Internet of Things. MVTec is the developer and vendor of the general purpose machine vision software products HALCON and MERLIC.
