Raspberry Pi Model B+
From Eben Upton, Raspberry Pi Founder:
This isn’t a “Raspberry Pi 2″, but rather the final evolution of the original Raspberry Pi. Today, I’m very pleased to be able to announce the immediate availability, at $35 – it’s still the same price, of what we’re calling the Raspberry Pi Model B+.
The Model B+ uses the same BCM2835 application processor as the Model B. It runs the same software, and still has 512MB RAM; but James and the team have made the following key improvements:
More GPIO. The GPIO header has grown to 40 pins, while retaining the same pinout for the first 26 pins as the Model B.
More USB. We now have 4 USB 2.0 ports, compared to 2 on the Model B, and better hotplug and overcurrent behaviour.
Micro SD. The old friction-fit SD card socket has been replaced with a much nicer push-push micro SD version.
Lower power consumption. By replacing linear regulators with switching ones we’ve reduced power consumption by between 0.5W and 1W.
Better audio. The audio circuit incorporates a dedicated low-noise power supply.
Neater form factor. We’ve aligned the USB connectors with the board edge, moved composite video onto the 3.5mm jack, and added four squarely-placed mounting holes... (cont'd)
Intro to Shape Memory Alloy Actuation Using Flexinol
From Jie Qi's projects page:
Shape memory alloys (SMAs) are metals that change shape when heated up. They are wonderful actuators in that they are light, silent and can be "turned on" by simply running current through. The shape that they change to can also be set, though this process is a bit more tricky. Flexinol is a particular brand of nitinol, which is an SMA made of nickel and titanium, and is pre-set to contract about 10% of its original length when heated.
In my projects, I generally used the 0.006" to 0.01" diameter, High-Temp wires.
Since Flexinol draws a lot of current (about 300mA for the diameters I used), you need a strong power supply like a wall supply or a good lithium-ion battery. I've used from 3.7V up to 6V (any more and my Flexinol wires would start overheating). To turn the Flexinol on, I would simply short the ends of the wire to the power. For digital control, I used a standard MOSFET circuit which is a digital switch that can be turned on and off using a microcontroller... (cont'd)
Interview with e-NABLE Founder Jon Schull
By far, one of the most inspirational and impressive projects thats come from the 3D printing/DIY community has been the work were seeing on open-source assistive devices, and one online organization that is playing a major role in making this happen is e-NABLE, a group started by Dr. Jon Schull of Rochester Institute of Technology.
BugJuggler: Project to build 70ft tall robot that juggles cars
Project Overview:
BugJuggler will use a diesel engine to generate hydraulic pressure. An operator located in the robot’s head will be able to control its motions using a haptic feedback interface connected to high-speed servo valves. Hydraulic accumulators - essentially storage batteries for hydraulic fluid - will allow for the rapid movement required for the robot to juggle cars or other large, heavy objects.
The first stage of the BugJuggler project will be construction of a working 8ft tall single arm proof-of-principle juggler able to toss and catch a 250lb mass... (cont'd)
Intel's 3-D Printed Robot "Jimmy"
From Wired:
Intel describes Jimmy as a research robot, but a less sophisticated version of the adorable droid will go on sale later this year for $1,600. The caveat is that you will have to 3D print your Jimmy. The 3D printing blueprints will be available without charge, but to construct the robot you will also need to purchase a kit from Intel that will contain all the parts of Jimmy that aren't printable, including motors and an Intel Edison processor.. (cont'd)
Carl Dekker of Met-L-Flo Discusses Challenges and Opportunities Arising in Additive Manufacturing
The industry needs standards for workforce development training, process repeatability and reliability, and process control.
USB 3.0 Steps Up To The Plate
Upgrading existing systems or basing new designs on plug-and-play USB3 Vision-compliant video interfaces, designers can produce a winning combination of performance, ease-of-use, and cost advantages.
The Emergence and Implications of Nanomanufacturing
Obviously, nanomanufacturing will require new kinds of skills that are needed for these high-tech manufacturing jobs, which require specialized education, such as powder processing and metallurgy extraction.
Open-source 3D Printed Life-size Robot
From InMoov's homepage:
Gael Langevin is a French modelmaker and sculptor. He works for the biggest brands since more than 25 years. InMoov is his personal project, it was initiated in January 2012 InMoov is the first Open Source 3D printed life-size robot. Replicable on any home 3D printer with a 12x12x12cm area, it is conceived as a development platform for Universities, Laboratories, Hobbyist, but first of all for Makers. It’s concept, based on sharing and community, gives him the honor to be reproduced for countless projects through out the world... (cont'd)
3D Video Capture With Three Kinects
From Doc-Ok.org:
Video from a capture space consisting of one Oculus Rift head-mounted display and three Kinect 3D cameras set up in an equilateral triangle, with each Kinect approximately 2m from the center point. The resulting 3D video data is merged with a virtual 3D model of an office environment... (cont'd)
What is Rapid Prototyping?
Whether a robot is needed to prototype a part or a robot is the object being prototyped, Rapid Prototyping is the future.
Design With Touchless Rotary Sensors
Touchless rotary sensors are position sensors that use a position marker attached to an applications rotating part plus a sensor to measure the markers angle.
Graphene - The New Magical Material
Graphene may possibly be the future replacement for silicone. Its a two-dimensional material that measures just one atom thick and has a breaking strength 300 times greater than steel.
Additive Manufacturing and 3D Printing The Future of Manufacturing
The next chapter in the industrial revolution is 3D printing, delivering a huge impact on additive manufacturing. It will not only create thousands of new jobs, but it will create many new businesses.
2013 Nanotechnology Patent Literature Review
Similar to computers, nanotechnology is both an enabling technology and a technology sector in its own right. Nanotechnology is prolific in the research and development of almost every economic sector, from aerospace to medicine to energy.
Records 1501 to 1515 of 1528
First | Previous | Next | Last
Mobile Robots - Featured Product
ResinDek TRIGARD ESD ULTRA FOR HIGH-TRAFFIC ROBOTIC APPLICATIONS
To maximize the productivity of an autonomous mobile robot (AMR) or automatic guided vehicle (AGV) deployment, it's critical to create the optimal environment that allows the vehicles to perform at their peak. For that reason, Cornerstone Specialty Wood Products, LLC (www.resindek.com) created the TriGard ESD Ultra finish for its ResinDek engineered flooring panels. The TriGard ESD Ultra finish is ideal for high-traffic robotic applications characterized by highly repetitive movement patterns and defined travel paths.
Robotics and Automation - Featured Company
Zimmer Group US, Inc.
Are you interested in premium products in the fields of mechanical and plant engineering? Do you want to learn more about our solutions in the fields of automation, damping, linear, processing, tooling, and machine tooling technology?
