Why I Automate - This Robot is Changing How We Cure Diseases
The benefits of automating a medical research lab include sifting through massive amounts of data in a short period of time.
T100 Underwater Thruster Designed for Marine Robotics
From BlueRobotics' Kickstarter:
An efficient, rugged, affordable underwater thruster to propel the future of marine robotics and ocean exploration. ($100 dollars a thruster, est delivery Nov 2014)
The T100 is made of high-strength, UV resistant polycarbonate injection molded plastic. The core of the motor is sealed and protected with an epoxy coating and it uses high-performance plastic bearings in place of steel bearings that rust in saltwater. Everything that isn’t plastic is either aluminum or high-quality stainless steel that doesn’t corrode.
A specially designed propeller and nozzle provides efficient, powerful thrust while active water-cooling keeps the motor cool. Unlike other thrusters, our design doesn’t have any air- or oil-filled cavities - water flows freely through all parts of the motor while it's running. That means it can go deep in the ocean and handle extreme pressures.
The thruster is easy to use: just connect the three motor wires to any brushless electronic speed controller (ESC) and you can control it with an RC radio or a microcontroller. It's usable with Arduino, ArduPilot, Raspberry Pi, BeagleBone, and many other embedded platforms... (kickstarter)
Coding & Marking Challenges: Common Industrial Print Techniques and Their Challenges
If a barcode or marking is unreadable, it can result in recalls, unhappy customers, and even fines. It is important to identify these issues early by implementing regular checks and verification to ensure quality.
Self-Folding Origami Robot Goes From Flat to Walking in Four Minutes
From IEEE Spectrum:
Printable, self-folding robot created by Harvard and MIT researchers... (IEEE Spectrum story) (full paper)
Hitchbot is Halfway Across its Canadian Journey
From hitchBOT's page:
I am hitchBOT — a robot from Port Credit, Ontario.
I am traveling from Halifax, Nova Scotia to Victoria, British Columbia this summer. As you may have guessed, robots cannot get driver’s licences yet, so I’ll be hitchhiking my entire way... (cont'd)
Nvidia Jetson TK1 Development Kit
Features ($192 ):
Tegra K1 SOC
Kepler GPU with 192 CUDA cores
4-Plus-1 quad-core ARM Cortex A15 CPU
2 GB x16 memory with 64 bit width
16 GB 4.51 eMMC memory
1 Half mini-PCIE slot
1 Full size SD/MMC connector
1 Full-size HDMI port
1 USB 2.0 port, micro AB
1 USB 3.0 port, A
1 RS232 serial port
1 ALC5639 Realtek Audio codec with Mic in and Line out
1 RTL8111GS Realtek GigE LAN
1 SATA data port
SPI 4MByte boot flash
Dr. Dobbs has an in depth look here.
Ino: Command Line Toolkit for Arduino Hardware
Ino tools webpage:
Ino is a command line toolkit for working with Arduino hardware
It allows you to:
Quickly create new projects
Build a firmware from multiple source files and libraries
Upload the firmware to a device
Perform serial communication with a device (aka serial monitor)
Ino may replace Arduino IDE UI if you prefer to work with command line and an editor of your choice or if you want to integrate Arduino build process to 3-rd party IDE.
Ino is based on make to perform builds. However Makefiles are generated automatically and you’ll never see them if you don’t want to.
Features
Simple. No build scripts are necessary.
Out-of-source builds. Directories with source files are not cluttered with intermediate object files.
Support for *.ino and *.pde sketches as well as raw *.c and *.cpp.
Support for Arduino Software versions 1.x as well as 0.x.
Automatic dependency tracking. Referred libraries are automatically included in the build process. Changes in *.h files lead to recompilation of sources which include them.
Pretty colorful output.
Support for all boards that are supported by Arduino IDE.
Fast. Discovered tool paths and other stuff is cached across runs. If nothing has changed, nothing is build.
Flexible. Support for simple ini-style config files to setup machine-specific info like used Arduino model, Arduino distribution path, etc just once.
(Homepage)
REMUS SharkCam: The Hunter and the Hunted
From Woods Hole Oceanographic Institution's Vimeo page:
In 2013, a team from the Woods Hole Oceanographic Institution took a specially equipped REMUS "SharkCam" underwater vehicle to Guadalupe Island in Mexico to film great white sharks in the wild. They captured more than they bargained for.
Additional article in Oceanus Magazine.
Automated Vision Inspection and Parts Traceability in Automotive Assembly Process
Compared to manual inspection, a machine vision and barcode reading system offers improved accuracy, higher consistency, and it works non-stop, day in and day out.
Robot With Broken Leg Learns To Walk Again In 2 Minutes
From Medium:
Today, Antoine Cully at the Sorbonne University in Paris and a couple of pals say they’ve developed a technique that allows a damaged robot to learn how to walk again in just a few seconds. They say their work has important consequences for the reliability and robustness of future robots and may also provide some insight into the way that animals adapt to injury as well... (cont'd)
Integrated Ultra-compact Barcode Imagers Enable Automated Laboratory Diagnostics
The EUROPattern Microscope is a high-performance automation solution designed for the evaluation of immunofluorescence slides in autoimmune diagnostics.
JIBO
From JIBO's Indiegogo campaign:
Friendly, helpful and intelligent. From social robotics pioneer Dr. Cynthia Breazeal.
OpenFPV
From Tilman Griesel's posts on DIY Drones:
Open source project to make FPV(first person view) with the raspberry pi easy to use for every one.
OpenFPV is a project that uses latest technology to provide low latency, easy and well tested open source FPV flying. Based on single-board computers, HD cameras and IEEE 802.11.
Current Features:
Recording
Web interface
Low-Latency H264 Streaming (≈120ms)
RESTful API
Customizable
Extendable
Installer (in progress)
Minimal bettery consumption
Roadmap:
Invite more people to join the development team
Complete the installer
More field tests with different setups
Create desktop applications for mac/win with HUD support
Add OculusVR support
Release is not available yet but you can follow the progress on DIY Drones or the OpenFPV homepage.
HEXO+ and their wildly successful Kickstarter project
Its a drone with an intelligent system that allows anyone to program it and have it either track a subject or follow planned scenarios.
5 Robotics Related Kickstarters And One Funded Product Available Now
We're always looking for new companies and products to spark the imagination of our readers. Crowd funding is a great place to look. Here are a few we think you will enjoy learning about.
Records 1681 to 1695 of 2199
First | Previous | Next | Last
Industrial Robotics - Featured Product
High Performance Servo Drives for localized and distributed control applications from Servo2Go.com
Engineered to drive brushless and brush servomotors in torque, velocity or position mode, Servo2Go.com offers a broad selection of servo drives in a wide range of input voltages and output power levels.
Robotics and Automation - Featured Company
Onward Robotics
Onward Robotics delivers innovative automation technology that coordinates humans and robots as a cohesive system to revolutionize fulfillment. Our Meet Me® solution combines proprietary software with person-to-goods mobile robots to increase efficiency in warehousing, distribution, and e-commerce operations. Onward Robotics provides the boost in productivity, flexibility, and speed that companies need to remain competitive and grow.
