MMP Inc Releases New 12V DC Gearmotor capable of 136 Lb In of torque aat 35 RPM, with IP54 Rating
03 Sept 2011: "IP-54" Sealed, Low Current, 12 Vdc Gearmotor Develops 136 Lb. In. Torque at 35 RPM
Midwest Motion Products, Inc. of Watertown, Minnesota, is pleased to announce the release of a new DC Gear Motor, the Model No. MMP TM57-12V GP52-124. Accepting any 12 Volt DC source, including solar or battery power, this robust Gear Motor measures just 2.24" in Diameter, by 7.76" long, and has a keyed output shaft of 12mm diameter by 25mm long. Easy mounting is accomplished with 4 "face mount" M5 threaded holes, equally spaced on a 40mm Dia. B.C.
The output of this reversible gearmotor is rated for 136 Lb. In. (15.3Nm) torque, at 35 RPM. Despite its compact size, and weight of approximately 4 pounds, it's an efficient design, requiring just 7.2 Amps at 12 Volts DC to generate its Full Load Torque. That translates into long life battery charge, very low noise operation, and lower costs for related drive electronics. Motor windings for 24V, 28V, 36V, 42V, 48V, 60V & 90 Volts are available.
This unique design is rated at an "IP 54" protection level for operation in harsh environments. Variable Speed control can be accomplished with our fully compatible Speed Controls, Model MMP 25A-12V, or
MMP Releases new 12V DC Gearmotor - 136 In Lbs torque at 140 RPM output speed
Midwest Motion Products of Watertown, Minnesota, is pleased to announce the release of a new DC Gear- Motor, Model # MMP-D33-455A-12V GP81-029 - Accepting any 12 Volt DC source, including battery power, this robust Gear Motor measures just 3.2" (max) Diameter, by 9.25" long and has a keyed output shaft of 19mm diameter by 40mm long. Easy mounting is accomplished with 4 "face mount" M6 threaded holes, equally spaced on a 65mm Dia. B.C. or an optional NEMA34 Flange, is also available.
The output of this fully reversible gearmotor is rated for 136 IN-LBS continuous torque, at 140 RPM, and 1062 IN-LBS (120 Nm) Peak Torque. Despite its compact size, and weight of approximately 11 pounds, it's an efficient design, requiring just 28.6 Amps at 12 Volts DC to generate its Full-Load Torque. This translates into long battery charge, very LOW-NOISE operation, and lower cost drive electronics. Motor windings for 18v, 24v, 28v, 36v, 42v, 48v, 60v & 90 Volts are available.
MMP RELEASES NEW 24V DC PLANETARY GEARMOTOR FOR ROBOTICS & AUTOMATION APPLICATONS
This is to announce our latest Product Innovation, the Model MMP D33-455D-24V GP81-029 DC Gearmotor.
The fully reversible Gearmotor operates with a 24V DC Input, while consuming just 14 A of current.
Adding to its versatility, the unit is designed with a rear shaft extension, and threaded mounting holes for an integrally mounted optical encoder.
This unique design features a High Efficiency Planetary Gearing, High Output Power to size & weight ratio, Low Speed and Low Noise, in a Compact, Lightweight (Just 11 Pounds!) 24 Volt DC Gearmotor.
Please find attached the Press Release, Technical Specification Sheet, and a Photograph of this exciting new "Built in the USA" product.
Typical uses for this "Compact, Lightweight" 24 Volt DC Gearmotor would include Mobility & Accessibility Equipment, Autonomous/Robotic Vehicles, UGV's, UUV's, Alternative Energy Equipment, including Solar Tracking, Linear Actuators, Automotive Accessories, Material Handling Equipment, Moving Target Equipment, Rotating Signage, and battery powered Electric Utility Vehicles of all kinds.
This unit is able to develop its full continuous output torque of 136 In Lbs. at 140 RPM, while consuming 28.6 Amps of current. That translates to a long life battery charge, quiet operation, and lower cost drive electronics, to mention just a few of the many benefits available to the user..
Zaber's New A-LST-C Series High Load, Motorized Linear Stages with Dust Covers
Zaber's A-LST-C stages are computer-controlled and have travel ranges from 254 mm up to 1500 mm. These stages are available with various lead screw pitches so you can select the device with the resolution and speed capability that you need. Zaber's innovative stage design is capable of speeds up to 420 mm/s, and can support loads up to 100 kg
Maxon's New ESCON 36/2 - A Powerful PWM Servo Controller
Maxon's new ESCON 36/2 DC is a 4-quadrant PWM servo controller for use with DC motors up to 72 Watt. This very fast digital current controller, with enormous bandwidth for optimal motor current/torque control, provides drift-free yet extremely dynamic speed behavior through a speed range of 1 to 150,000 rpm.
Records 2101 to 2105 of 2105
Featured Product
MVTec MERLIC 5.8
With MERLIC 5.8, MVTec expands its easy-to-use machine vision software. The latest version improves process reliability beyond pure image processing, offering enhanced error handling and optimized configuration. This enables faster setup and stable deployment across diverse production environments. Explore MERLIC 5.8 now
Robotics and Automation - Featured Company
e-con Systems
e-con Systems® develops complete embedded vision solutions—including OEM cameras and edge AI compute platforms. With 20+ years of experience and expertise in embedded vision, it focuses on delivering vision and camera solutions to industries such as Robotics, Mobility, Medical and Life Science, Agriculture, Intelligent Transport Systems, Sports Analytics and more. e-con Systems' wide portfolio of products includes MIPI camera modules, GMSL cameras, USB 3.2 cameras, Depth cameras, GigE cameras, HDR cameras, low light cameras, and more. Our cameras are currently embedded in over 350+ customer products, and we have shipped over 2 million cameras to the United States, Europe, Japan, South Korea, and many other countries.
