GstarCAD Attended CHIAC in Mexico

Beijing, China: November 21, 2012-Recently, CHIAC Mexico 2012 was held in Banamex exhibition center. As an international leading CAD products and solution provider, Gstarsoft attended this exhibition with the products of GstarCAD MC PRO, GstarCAD 2012, and GstarCAD Architecture 2012 and so on.

GstarCAD Showcased in CONSTRUIR RIO, Brazil

Rio de Janeiro, Brazil, Nov 7th - 10th, 2012 - Gstarsoft, one of the world leading providers of 2D/3D design software and its authorized distributor - Arkisoft successfully showed GstarCAD in the CONSTRUIR RIO held in Riocentro Convention Center.

ST Robotics Offers 11-Axis Tandem Robot System for under $20,000

Tandem R125 features two 5-axis vertically articulated robot arms mounted to programmable carousel. Also included are 2 interconnected K11R robot controllers enabling communications to synchronize motions of both robots or allowing robots to alternate turns while performing one task. RoboForth II software, teach pad, equipment interfacing, and cables are included in industrial system.

Innorobo Announces Initial Lineup of Speakers for 2013 International Robotics Summit

Innorobo attracts top range leaders, pioneers and researchers with international prominence.

MMP RELEASES NEW 24V DC PLANETARY GEARMOTOR FOR ROBOTICS & AUTOMATION APPLICATONS

This is to announce our latest Product Innovation, the Model MMP D33-455D-24V GP81-029 DC Gearmotor. The fully reversible Gearmotor operates with a 24V DC Input, while consuming just 14 A of current. Adding to its versatility, the unit is designed with a rear shaft extension, and threaded mounting holes for an integrally mounted optical encoder. This unique design features a High Efficiency Planetary Gearing, High Output Power to size & weight ratio, Low Speed and Low Noise, in a Compact, Lightweight (Just 11 Pounds!) 24 Volt DC Gearmotor. Please find attached the Press Release, Technical Specification Sheet, and a Photograph of this exciting new "Built in the USA" product. Typical uses for this "Compact, Lightweight" 24 Volt DC Gearmotor would include Mobility & Accessibility Equipment, Autonomous/Robotic Vehicles, UGV's, UUV's, Alternative Energy Equipment, including Solar Tracking, Linear Actuators, Automotive Accessories, Material Handling Equipment, Moving Target Equipment, Rotating Signage, and battery powered Electric Utility Vehicles of all kinds. This unit is able to develop its full continuous output torque of 136 In Lbs. at 140 RPM, while consuming 28.6 Amps of current. That translates to a long life battery charge, quiet operation, and lower cost drive electronics, to mention just a few of the many benefits available to the user..

Pressure Sensor Market is Expected to Reach $7.34 Billion at a CAGR of 6.3% from 2012 to 2017 by MarketsandMarkets

Pressure Sensor market research report categorizes the global market on the basis of technologies, applications and geographical analysis; forecasting revenue and analyzing trends in the pressure sensor market.

FABTECH 2012 Confirms: Manufacturing is the Comeback Player of the Year

Record turnout and brisk sales show that manufacturing in the U.S. has a bright future.

Behlman's 94050 UAV Power Supply Proves that the Sky is no Limit for Powering Systems on Unmanned Aerial Vehicles

Behlman COTS Power-on-a-Card can be configured to meet the size, shape and power requirements of virtually any UAV.

U.S. Fish and Wildlife Service Purchases SkyFusion Pak System

SkyIMD, the innovators in aerial imaging and Intelligence, Surveillance and Reconnaissance (ISR) solutions, announces that it has been awarded a contract by the USFWS Office of Law Enforcement Aviation for its SkyFusion Pak 2000 aerial imaging system. Enforcement division extends capabilities with SkyIMD aerial imaging system.

Global Futurist and Business Forecaster Jack Uldrich to Keynote a Series of Entrepreneurship and Economic Development Summits

Acclaimed global futurist, best-selling author and business forecaster Jack Uldrich has been selected to deliver closing keynote addresses at the 2012 Central Pennsylvania Entrepreneurship Conference and the Indiana Economic Development Association's Annual Meeting. In addition to covering future trends in information technology, mobile computing, social networking, "Big Data," biotechnology, nanotechnology, robotics and 3D printing, he will also discuss the need for "unlearning."

New Precision-Guided Mortar Technology Demonstrated at Oklahoma Training Center for Unmanned Systems

The Oklahoma Training Center for Unmanned Systems offers direct access to more than 200 square miles of restricted airspace.

Production of solar panels - better and more cost-efficient

Reis Robotics presents the latest developments for quality assurance and cost savings in new and existing fully automated production lines for solar modules.

Northrop Grumman Information Systems Honors Vecna with 2012 Annual Suppliers Excellence Award

Vecna has worked with NGIS since 2005, performing collaborative scientific research and technical development on the NIAID BioHealthBase, Virus Pathogen Resource (ViPR) Database and Influenza Research Database (IRD) projects.

MassEcon Announces Vecna as a winner for the 9th Annual Team Massachusetts Economic Impact Awards

Winners selected based on job growth, expansion and investment, and community involvement

Vecna Employees Salute Veteran Family Members

Over thirty employee's confirmed a close family relation to a Veteran of the US Armed Forces

Records 4621 to 4635 of 5831

First | Previous | Next | Last

Industrial Robotics - Featured Product

Universal Robots - Collaborative Robot Solutions

Universal Robots - Collaborative Robot Solutions

Universal Robots is a result of many years of intensive research in robotics. The product portfolio includes the UR5 and UR10 models that handle payloads of up to 11.3 lbs. and 22.6 lbs. respectively. The six-axis robot arms weigh as little as 40 lbs. with reach capabilities of up to 51 inches. Repeatability of +/- .004" allows quick precision handling of even microscopically small parts. After initial risk assessment, the collaborative Universal Robots can operate alongside human operators without cumbersome and expensive safety guarding. This makes it simple and easy to move the light-weight robot around the production, addressing the needs of agile manufacturing even within small- and medium sized companies regarding automation as costly and complex. If the robots come into contact with an employee, the built-in force control limits the forces at contact, adhering to the current safety requirements on force and torque limitations. Intuitively programmed by non-technical users, the robot arms go from box to operation in less than an hour, and typically pay for themselves within 195 days. Since the first UR robot entered the market in 2009, the company has seen substantial growth with the robotic arms now being sold in more than 50 countries worldwide.