IMTS 2014 - Flexible Honing Tools for Manufacturing: BRM Announces IMTS 2014 Results, Publishes Surface Finishing and Deburring Technical Article
Brush Research Manufacturing (BRM), American-owned supplier of flexible hones and industrial brushes, announces tradeshow success at IMTS 2014 and a new technical article about flexible cylinder honing for manufacturers. The industry standard for surface improvement and burr removal, BRM Flex-Hone® tools can be used for on-line or off-line operations in factories.
Energy Department Takes Major Steps to Increase U.S. Energy Productivity and Manufacturing
In Support of President Obamas Call to Cut U.S. Energy Waste in Half, DOE Announces Additional Efforts to Increase Economic Output From U.S. Energy Use
Adept Technology Introduces Acuity Mobile Robot Localization Technology
"Acuity" Feature Enables "Lynx" Mobile Vehicle Navigation in Extremely Dynamic Environments
ZW3D 2014 SP Released with Enriched 3D Modeling and CNC Machining Advancements
Upgrading 3D Modeling with Optimized Functionalities
Evana Automation to Supply Robotic Assembly Cell to Leading Medical Device Manufacturer
Evana solution will help error-proof the process of assembling catheter parts and reduce labor.
KUKA Systems develops robotic riveting system for Boeing 777 wide-body fuselage assembly
For KUKA Systems, the project is one of the largest it has undertaken in the aerospace sector.
Manufacturers Moving to be Closer to Consumers as New Technologies and Mass Customisation Shift Global Trends in Manufacturing
New technologies such as 3D printing, Robots and Big-Data, bringing 82% of manufacturers closer to their customers
IMTS 2014 - ESAB Brings Advanced Welding Automation, CNC Cutting to IMTS 2014
ESAB Welding & Cutting Products demonstrated the latest in welding automation and CNC cutting at IMTS 2014, The International Manufacturing Technology Show, held September 8 - 13, at Chicagos McCormick Place.
Beckwood and Triform Announce FABTECH 2014 Plans
Beckwood Press Company, a leading manufacturer of custom hydraulic presses, automation systems, and the Triform line of sheet hydroforming presses, will be both exhibiting and presenting an education session at FABTECH 2014 in Atlanta, GA, November 11-13, 2014
IMTS 2014 - Epicor Announces Integration between Epicor ERP and Mattec MES
"Out-of-the-Box" Integration Provides Quicker Deployment and Faster Time to Value; Real-Time Top-to-Shop Data Improves Operational Efficiency for Profitable Growth
Open Source Robotics Foundation to Extend ROS Support to Qualcomm Snapdragon Processors
Roboticists Now Able to Incorporate System-On-A-Chip Capabilities in Robot Designs and Applications
RazerCam Smarter Camera with Programmable FPGA for Machine Vision
FSI Technologies announces the latest "smarter camera" offering from EVT the RazerCam. The compact RazerCam series is based on the XILINX ZYNQ SoC, and is equipped a user programmable FPGA. The RazerCam is suitable for industrial automation, as well as motion control, machine vision, robot and AGV applications.
XIMEA Now Ships Fastest USB 3.0 Cameras With Multi-Tap CCD
XIMEA GmbH now ships the new xiD family - USB 3.0 bus powered CCD cameras with resolutions from 2.8 to 12 Mpix. Utilizing the full potential of 4 taps of the sensor, XIMEA cameras achieve record speeds while delivering highest dynamic range and SNR performance.
Fanuc Corporation and Rockwell Automation Announce Global Collaboration
On Integrated Manufacturing Solutions
IMTS 2014 - Manufacturing Industry Breaks Guinness World Record During America's Largest Manufacturing Technology Show
World's Largest Coin Mosaic Benefits Next Generation of Manufacturing Workers
Records 6571 to 6585 of 6867
First | Previous | Next | Last
Factory Automation - Featured Product
US Digital's New L2 Low Profile Motor Encoder
The L2 incremental encoder uses US Digital's proven EM1 optical encoder module and disk, which has billions of device-hours of dependable service in customer applications. This product continues US Digital's strong reputation for reliable, field-tested encoders. The L2 is US Digital's lowest height encoder that uses the EM1 module. It has a 0.75 in. bolt-spacing mount. The maximum resolution is 1250 CPR (5000 PPR with quadrature). The L2 comes with a single-ended output. Another benefit of the L2 incremental encoder is its fast installation. The cover snaps onto the base to secure the module. It is designed for use with a high-retention connector or cable (sold separately). Like all US Digital products, the L2 is designed and manufactured in Vancouver, Washington, USA. It is backed by prompt access to our technical and customer service teams with same-day shipping on most orders.
Robotics and Automation - Featured Company
Mouser
Mouser is an authorized semiconductor and electronic component distributor focused on New Product Introductions from its leading manufacturer partners. Serving the global electronic design engineer and buyer community, the global distributor's website, mouser.com, is available in multiple languages and currencies and features more than 6.8 million products from over 1,200 manufacturer brands. Mouser offers 28 support locations worldwide to provide best-in-class customer service in local language, currency and time zone. The distributor ships to over 650,000 customers in 223 countries/territories from its 1 million-square-foot, state-of-the-art distribution facilities in the Dallas, Texas, metro area.
