The DARPA Robotics Challenge Continues June 2015 in Southern California

U.S., International teams to compete for $2M prize, June 5-6, 2015, in Pomona, California

From June 5-6, 2015, California will be the stage for the DARPA Robotics Challenge (DRC) Finals. Teams from around the world will meet at Fairplex in Pomona to compete for the $2 million prize to be awarded to the team that best demonstrates human-supervised robot technology for disaster response.

The DRC is a competition of human-robot systems developed to help emergency personnel respond to natural and man-made disasters. Participating teams from some of the most advanced robotics research and development organizations in the world are designing hardware, software, sensors, and human-machine control interfaces to be tested in a series of tasks selected by DARPA for their broad relevance to disaster response operations.

"Six months ago at the DRC Trials, we began physically testing human-supervised robots against disaster-relevant tasks. Their impressive performance gave us the confidence to raise the bar," said Dr. Gill Pratt, DRC program manager. "A year from now at the DRC Finals we will push the technology even further."

While the tasks at the DRC Finals will be similar to the Trials, a number of new elements will challenge the team's systems:

*Robots will not be connected to power cords, fall arrestors, or wired communications tethers;

*Humans will not be allowed to physically intervene if a robot falls or get stuck—robots that fall will have to do so without breaking and will have to get up without assistance;

*Speed will be more heavily weighted in the scoring, and all tasks must be completed in a total time of approximately one hour (versus four hours in the DRC Trials);

*Communications will be further degraded and intermittent.

Completing the tasks in the time allotted will require innovations on several fronts, including in the human-robot interfaces teams use to control their robots.

"For the first time, teams will be empowered to exploit cloud and crowd-augmented robotics, two highly promising research areas that allow onsite operators to leverage remote data, computing, and human resources," said Pratt. "These research areas are in their infancy, but after the DRC Finals we hope to see significant innovation."

A number of teams were declared finalists at the DRC Trials based on points scored during the December 2013 event, qualifying them for automatic entry into the DRC Finals and, for some, DARPA funding. The first-place finisher, SCHAFT, has elected to withdraw from the Finals to focus on the development of its first commercial product. Another finalist, Team THOR, has since split into two teams; one, Team THOR, remains at Virginia Tech and the other, Team Valor, is based at the University of California, Los Angeles. All of the finalists except Team KAIST are presently receiving DARPA funding.

The 11 finalists are:

*IHMC Robotics (Florida Institute for Human & Machine Cognition, Pensacola, Florida)

*Tartan Rescue (Carnegie Mellon University, National Robotics Engineering Center, Pittsburgh, Pennsylvania)

*Team MIT (Massachusetts Institute of Technology, Cambridge, Massachusetts)

*RoboSimian (NASA Jet Propulsion Laboratory, Pasadena, California)

*Team TRACLabs (TRACLabs, Inc., Webster, Texas)

*Team WPI-CMU (formerly Team WRECS, Worcester Polytechnic Institute, Worcester, Massachusetts)

*Team Trooper (Lockheed Martin Advanced Technology Laboratories, Cherry Hill, New Jersey)

*Team ViGiR (Virginia Tech, Blacksburg, Virginia)

*Team THOR (University of California, Los Angeles, California)

*Team Valor (Virginia Tech, Blacksburg, Virginia)

*Team KAIST (Daejeon Metro City, Republic of Korea)

DARPA expects many more teams to join the DRC Finals competition, including new teams sponsored by the European Union and the governments of Japan and Korea.

Pre-registration—the first-step for new teams to participate in the DRC finals—is now open on the DRC website (

Fairplex, the venue for the DRC Finals, is a not-for-profit, public benefit organization with over 480 acres of multi-use event space located near major airports and highways.

MorMore information about the DARPA Robotics Challenge is available at

Featured Product

Universal Robots - Collaborative Robot Solutions

Universal Robots - Collaborative Robot Solutions

Universal Robots is a result of many years of intensive research in robotics. The product portfolio includes the UR5 and UR10 models that handle payloads of up to 11.3 lbs. and 22.6 lbs. respectively. The six-axis robot arms weigh as little as 40 lbs. with reach capabilities of up to 51 inches. Repeatability of +/- .004" allows quick precision handling of even microscopically small parts. After initial risk assessment, the collaborative Universal Robots can operate alongside human operators without cumbersome and expensive safety guarding. This makes it simple and easy to move the light-weight robot around the production, addressing the needs of agile manufacturing even within small- and medium sized companies regarding automation as costly and complex. If the robots come into contact with an employee, the built-in force control limits the forces at contact, adhering to the current safety requirements on force and torque limitations. Intuitively programmed by non-technical users, the robot arms go from box to operation in less than an hour, and typically pay for themselves within 195 days. Since the first UR robot entered the market in 2009, the company has seen substantial growth with the robotic arms now being sold in more than 50 countries worldwide.