TRINAMIC Offers High Density Servo Drive Chipset With 3-Phase Gate Driver Coupled With Bosch B6 Power Module

TRINAMIC bridge gate drivers and Bosch B6 power modules represent perfectly balanced packages for industrial BLDC and PMSM drives up to 1.5kW

HAMBURG, Germany--TRINAMIC Motion Control introduces a new powerful gate driver perfectly matched with Bosch's MB0413A B6 power module.


TRINAMIC, a technology innovator specializing in the control of small electric motors, extends its portfolio of 3-phase motor drivers by leveraging Bosch's innovative and highly integrated B6 power modules.

Bosch B6 bridges match perfectly to the new TRINAMIC BLDC / PMSM gate driver product family, whose first member, the TMC6130, is also being announced today. The TMC6130 and the Bosch MB0413A power module form an ideal solution for motors with up to 1.5 kW of power at 24 V supply voltage, targeting applications where available board space is limited and optimal heat dissipation and low power dissipation is required. TRINAMIC's TMC6130 also provides diagnostic and protection features.

Dr. Anne Lorenz, Sales Manager at Bosch Power Modules, said, \"With our MOSFET modules, compact power stages with high reliability at attractive system costs can be realized, which is in demand beyond just the automotive sector. TRINAMIC was involved early on in the technical evaluation for industrial applications.\"

\"Our R & D team has been evaluating B6 bridges, constructing test assemblies and comparing performance and costs against discrete implementations,\" explained Michael Randt, founder and CEO of TRINAMIC. \"The benefits are impressive and the B6 bridges extend our portfolio of solutions perfectly.\"

The MB0413A replaces six discrete MOSFET switches and allows for more dense packing in the control unit. With TRINAMIC's TMC6130-LA, a powerful 3-Phase PWM gate driver, a full high current three-phase power stage can be designed on a board as small as 50mmx50mm.

The power module layout is optimized for low stray inductance, resulting in reduced switching losses and fewer voltage overshoot problems. The through-hole board design allows for an optimized layout with a gate driver on the opposite site of the component, resulting in short gate leads.

Large exposed areas on the bottom of the power bridge allow for a good thermal connection over a single large contact area to a housing or heat-sink available at TRINAMIC.

TRINAMIC will offer the TMC6130 gate driver in combination with Bosch's Power modules from March 2015.

To enable rapid design-in, thermally optimized reference designs and an open source hardware evaluation board and code samples are available.

About TRINAMIC
Based in Hamburg, Germany, privately-held TRINAMIC Motion Control GmbH & Co. KG is a recognized global leader in motor and motion control technologies. Leveraging its extensive portfolio of internally developed IP, TRINAMIC Motion Control products emphasize efficiency, quality and ease-of-use.

The company sells ICs, modules and integrated mechatronics to market leading manufacturers worldwide. The company's products have been integrated into a wide range of applications in biotechnology, lab automation, materials handling, CCTV and factory automation. More information about TRINAMIC can be obtained on the company website: http://www.trinamic.com.

Featured Product

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow has offered a Camera Link frame grabbers for almost 15 years. This latest offering, our 6th generation combines the power of CoaXPress with the requirements of Camera Link 2.0. Enabling a single or two camera system to operate at up to 850 MB/S per camera, the Axion-CL family is the best choice for CL frame grabber. Like the Cyton-CXP frame grabber, the Axion-CL leverages features such as the new StreamSync system, a highly optimized DMA engine, and expanded I/O capabilities that provide unprecedented flexibility in routing. There are two options available; Axion 1xE & Axion 2xE. The Axion 1xE is compatible with one base, medium, full or 80-bit camera offering PoCL, Power over Camera Link, on both connectors. The Axion 2xE is compatible with two base, medium, full or 80-bit cameras offering PoCL on both connectors for both cameras. The Axion-CL is a culmination of the continuous improvements and updates BitFlow has made to Camera Link frame grabbers.