Innodisk Announces Ruggedized mPCIe CAN Bus Adapter for Industrial and Embedded Systems

EMUC-B201 Enables the Internet of Things by Giving Embedded Computers and IPCs Access to Sensors and Subsystems

Taipei, Taiwan - Innodisk, the service driven provider of flash, memory and peripherals for industrial and embedded systems, introduces a new embedded peripheral module that extends embedded systems and industrial PCs with CANBus capability for the Internet of Things. The EMUC-B201 is a ruggedized mPCIe embedded peripheral module that provides dual channel CAN Bus 2.0A/B functionality to an embedded or industrial computer. With CANBus widely used in both vehicle sensor and subsystem communication as well as factory automation and control systems, the EMUC-B201 peripheral enables embedded systems for the Internet of Vehicles and Industrial PCs for Industry 4.0.

Dual Channel CAN 2.0B
The EMUC-B201 can interface two CAN Bus channels through either the mPCIe connector or a direct pin header connection for USB 2.0 communication with the main system. Invented originally for automotive subsystem communication and coordination, the CAN Bus is a real-time communication protocol connecting sensors, actuators and electronic control units(ECUs) and is widely used in both vehicles and modern factory control and automation. Both high speed CAN 2.0B and lower speed fault-tolerant CAN 2.0A are supported. The EMUC-B201 enables embedded systems to tap directly into vehicle or factory sensors and subsystems for real time data access and control.

Dual Interface Flexibility
The EMUC-B201 can connect to a host system through an mPCIe physical interface or through a direct USB 2.0 pin header connection located on the card. Besides fitting in a standard mPCIe slot, the EMUC-B201 has 3 mounting holes and can be mounted directly onto an embedded motherboard and connected via the USB pin header, allowing it to be installed in systems without a free mPCIe slot.

Rugged Industrial Design
The EMUC-B201 is built to stand up to the harsh physical and electrical conditions of industrial and automotive environments. With an extra thick 30u Gold Finger connector for a good connection, as well as strong shock and vibration resistance, it stands up to the bumps of the road. The CAN Bus connections are galvanic isolated to 2500V, shielding the card from harsh power surge conditions and feature termination resistors for clean signaling without reflection. Finally, with operating temperature from -40° to 85°C the EMUC-B201 can operate across a variety of temperature ranges.

2 Channel CAN bus (2x DB9)
Supports CAN 2.0B & CAN 2.0A
Galvanic isolation to 2500 V
mPCIe form factor
30u Gold Finger interface for a reliable connection
Wide operating temperature: -40° to 85°C
USB 2.0 interface through mPCIe slot or pin header interface
Extra mounting holes for direct installation

About Innodisk
Innodisk (Taiwan: 5289) is a service driven provider of flash memory and DRAM products for the industrial and enterprise applications. With satisfied customers across the embedded, aerospace and defense, cloud storage markets and more, we have set ourselves apart with a commitment to dependable products and unparalleled service. This has resulted in products including embedded peripherals designed to supplement existing industrial solutions and high IOPS flash arrays for industrial and enterprise applications. The expanded business lines are leading our next step in being a comprehensive solution and service provider in industrial storage industry.

Founded in 2005 and headquartered in Taipei, Taiwan with engineering support and sales teams in China, Europe, Japan, and the United States, Innodisk is able to support clients globally. With abundant experience and an unrivaled knowledge of the memory industry, Innodisk develops products with excellent quality, remarkable performance, great cost-efficiency, and the highest reliability. For more information about Innodisk, please visit

Featured Product

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow has offered a Camera Link frame grabbers for almost 15 years. This latest offering, our 6th generation combines the power of CoaXPress with the requirements of Camera Link 2.0. Enabling a single or two camera system to operate at up to 850 MB/S per camera, the Axion-CL family is the best choice for CL frame grabber. Like the Cyton-CXP frame grabber, the Axion-CL leverages features such as the new StreamSync system, a highly optimized DMA engine, and expanded I/O capabilities that provide unprecedented flexibility in routing. There are two options available; Axion 1xE & Axion 2xE. The Axion 1xE is compatible with one base, medium, full or 80-bit camera offering PoCL, Power over Camera Link, on both connectors. The Axion 2xE is compatible with two base, medium, full or 80-bit cameras offering PoCL on both connectors for both cameras. The Axion-CL is a culmination of the continuous improvements and updates BitFlow has made to Camera Link frame grabbers.