Novotechnik - New Heavy Duty Redundant Angle Sensors

Novotechnik, U.S. introduces the RFX 6900 Series of touchless rotary sensors. These magnetic sensors are design for use in mobile, safety-related and extreme environment applications.

Southborough, MA… Novotechnik, U.S. introduces the RFX 6900 Series of touchless rotary sensors. These magnetic sensors are design for use in mobile, safety-related and extreme environment applications.

Housing of the RFX 6900 Series is anodized aluminum and sealed to IP 67 or IP 69K—depending on version. Conforms to ISO 13849 for safety related applications. MTTF is 46 to 92 years—depending on version/channels. RFX 6900 Series sensors have housing dimensions of: diameter is 69 mm and height is 20.4 mm.
Electrical angular range is 0 to 360° with single and fully redundant versions. RFX 6900 Series has a maximum independent linearity of ±0.5 % of full scale. Measuring ranges include 0 to 60, 120, 180, 240, 300 and 360 degrees. Output options are 4 to 20 mA and CANopen. Resolution is 14-bit for CANopen version.
Operational speed is unlimited mechanically and update rate 1 and 5 kHz for CANopen and analog versions respectively. Shock is up to 50 g and vibration is up to 20 g.
For more information contact Novotechnik U.S., Inc., 155 Northboro Road, Southborough, MA 01772 • Phone: 508-485-2244 • Fax: 508-485-2430 • Web: www.novotechnik.com/rfx69

Featured Product

REIKU's Cable Saver™ - The Most Versatile Modular Robotic Cable Management Solution

REIKU's Cable Saver™ - The Most Versatile Modular Robotic Cable Management Solution

REIKU's Cable Saver™ Solution eliminates downtime, loss of revenue, expensive cable and hose replacement costs, maintenance labor costs. It's available in three sizes 36, 52 and 70 mm. All of the robots cables and hoses are protected when routed through the Cable Saver™ corrugated tubing.The Cable Saver™ uses a spring retraction system housed inside the Energy Tube™ to keep this service loop out of harms way in safe location at the rear of the Robot when not required. The Cable Saver™ is a COMPLETE solution for any make or model of robot. It installs quickly-on either side of the robot and has been tested to resist over 15 million repetitive cycles. REIKU is committed to providing the most modular, effective options for ensuring your robotic components operate without downtime due to cable management. www.CableSaver.com