New Xtium2 frame grabber from Teledyne supports high-speed GigE machine vision cameras
Xtium2-XGV PX8 targets image acquisition from single or multiple independent 10, 5, 2.5, or 1GigE Vision area scan cameras, line scan cameras, and 3D profile sensors.
Waterloo, CANADA - December 5, 2023 - Teledyne DALSA is pleased to announce its Xtium™2-XGV PX8, a GigE Vision® compatible image acquisition board that features a real-time depacketization engine to convert GigE Vision image packets into ready-to-use images. It also has a hardware-assisted packet resend logic that improves the reliability of image transfers while reducing the CPU overhead. Xtium2-XGV PX8 targets image acquisition from single or multiple independent 10, 5, 2.5, or 1GigE Vision area scan cameras, line scan cameras, and 3D profile sensors.
Building on the field-proven technology and performance of Teledyne DALSA's Xtium2 family of image acquisition boards, the new Xtium2-XGV PX8 is a half-length multi-port 10GigE frame grabber for PCI Express™ Gen 3.0 x8 platforms. It can support up to 32 cameras in a variety of different link-speeds and scanning configurations. Available in a four or two port SFP+ configurations, the Xtium2-XGV PX8 can sustain aggregate input bandwidth of 4 GByte/s (4x10 Gb/s) and up to 6.8 GBytes/sec output bandwidth to the host memory. It can also perform a variety of on-board format conversions like Bayer to RGB, Bi-colour to RGB, etc. before sending the images to the host computer.
For a more reliable GigE vision system, Xtium2-XGV supports hardware assisted packet resend and action command for external event synchronization. It is also capable of transmitting/re-transmitting IEEE-1588 messages without requiring an external switch.
Xtium2-XGV supports Sapera™ LT and Teledyne FLIR® IIS' Spinnaker SDKs.
See a live demo of Xtium™2-XGV PX8 at the International Technical Exhibition on Image Technology and Equipment (ITE), Yokohama, Japan 6-8 December 2023. Visit us on Teledyne stand D-04 or contact us online for more information.
Teledyne DALSA is a part of Teledyne's Vision Solutions group and a leader in the design, manufacture, and deployment of digital imaging components for machine vision. Teledyne DALSA image sensors, cameras, smart cameras, frame grabbers, software, and vision solutions are at the heart of thousands of inspection systems around the world and across multiple industries. For more information, visit www.teledynedalsa.com/imaging.
Featured Product
The ERT150 - Dorner's Next Evolution of Edge Roller Technology Conveyors
The next evolution in Dorner's Edge Roller Technology conveyor platform, the ERT®150, is ideal for small and light-load assembly automation, as well as medical and medical-device assembly application. The ERT platform is the only pallet conveyor of its kind available with an ISO Standard Class 4 rating for cleanroom applications. Earning the ISO Standard 14644-1 Class 4 rating means Dorner's ERT150 will conform and not contribute to the contamination of cleanrooms to those standards. As implied by its name, the ERT150 (Edge Roller Technology) uses rollers to move pallets through the conveyor smoothly with no friction (a byproduct often seen in belt-driven platforms). The conveyor's open design eliminates concerns of small parts or screws dropping into rollers and causing conveyor damage or jamming. The ERT150 is suited to operate in cleanroom environments requiring a pallet handling conveyor. It is capable of zoning for no or low-back pressure accumulation and is ideal for automation assembly applications within industries including medical devices, electronics, consumer goods among others.
