The Inebriator

The Inebriator is a home made automated cocktail machine. The Inebriator is powered by an Arduino Mega 2560 Microprocessor Project Board. A Hitachi HD44780 compatible display is used to allow display drink information, coupled with a couple of buttons to navigate the menu. A stepper motor is used to drive the drinks shelf, with acceleration and deceleration to allow high speed without spilling. All mixers are in plastic bottles in a cool box, each bottle has two pipes, one that is hooked to the gas tank (70% Nitrogen and 30% Carbon Dioxide), and the other goes from the bottom of the bottle to a valve. When the gas tank is opened (through a regulator) the bottles are pressurised to a low safe pressure. When 12v is applied to the valve it opens, and the pressure causes the liquid to flow through the pipe and ultimately into the glass. Each mixer has its own valve and individually controllable.

Comments (0)

This post does not have any comments. Be the first to leave a comment below.

Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

SCHUNK's New Safety Gripping System EGN

SCHUNK's New Safety Gripping System EGN

With the SLS, SOS, and STO functionalities, the SCHUNK EGN gripping system certified in accordance with DIN EN ISO 13849 enables safe human/machine collaboration. If the production process is interrupted by an emergency shut-off, the SCHUNK EGN goes into either a safely limited speed mode or a safe stop mode depending on the activated protection zone. In contrast to other solutions available on the market, the SCHUNK safety gripping system is continuously powered even in the safe operating stop so that the gripped parts are reliably held even without mechanical maintenance of gripping force. As soon as the protection zone is released, the gripper immediately switches back to the regular operating mode without the system having to be restarted.