DJI Inspire 1

DJI's new Inspire 1 with 4K camera($2899 USD from DJI):

Aircraft specs:

Hovering Accuracy (GPS Mode)

Vertical: 1.6' / 0.5 m
Horizontal: 8.2' / 2.5 m
Maximum Angular Velocity Pitch: 300°/s
Yaw: 150°/s
Maximum Tilt Angle 35°/s
Maximum Ascent/Descent Speed Ascent: 16.4 fps / 5 m/s
Descent: 13.1 fps / 4 m/s
Maximum Speed 72.2 fps / 22 m/s (Attitude mode; no wind)
Maximum Flight Altitude 14,764' / 4,500 m
Maximum Wind Speed Resistance 32.8 fps / 10 m/s
Maximum Flight Time Up to 18 minutes

Camera:

Model Name: X3
Designation: FC350
Sensor Sony EXMOR 1/2.3" CMOS
Resolution 12.0 MP
Lens Field of View: 94°
Focal Length (35 mm Equivalent): 20 mm 
Aperture: f/2.8
Design: 9 elements in 9 groups; aspherical lens element
Filters: Anti-distortion filter; UV filter
Video Recording UHD (4K):
4096 x 2160: 24p, 25p
3840 x 2160: 24p, 25p, 30p

FHD (1080p):
1920 x 1080: 24p, 25p, 30p, 48p, 50p, 60p

HD (720p):
1280 x 720: 24p, 25p, 30p, 48p, 50p, 60p

Maximum Biterate: 60 Mbp/s
File Format Photo: JPEG, DNG
Video: MP4 in a .MOV wrapper (MPEG-4 AVC/H.264)
Recording Media Type: microSD/SDHC/SDXC up to 64 GB
Speed: Class 10 or faster
Format: FAT32/exFAT
Photography Modes Single shot
Burst: 3, 5, 7 frames per second (AEB: 3/5 frames per second; 0.7 EV bias)
Time-lapse
Operating Temperature 32 to 104°F / 0 to 40°C

Gimbal:

Model Zenmuse X3
Number of Axes 3-axis
Control Accuracy ±0.03°
Maximum Controlled Rotation Speed Pitch: 120°/s
Pan: 180°/s
Controlled Rotation Range Pitch: -90° to +30°
Pan: ±330°
Angular Vibration Range ±0.03°
Output Power Static: 9 W
In Motion: 11 W
Operational Current Static: 750 mA
In Motion: 900 mA
Mounting Detachable

 

Video with required "Johnny Ives-alike" introductory speech:

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

Servo2Go - Low-cost Tin-Can Stepper Motors from Nippon Pulse feature high torque and compact size

Servo2Go - Low-cost Tin-Can Stepper Motors from Nippon Pulse feature high torque and compact size

The PF/PFC series tin-can stepping motors are conventional magnet-driven rotary stepper motors with a permanent magnet in their rotor core. Rotating in proportion to the number of pulses sent to the motor, the stepper motor is frequency synchronized and can change speed depending on the frequency of the pulse signal.