Novotechnik - Ultra-Compact Hollow Shaft Angle Sensors

Novotechnik, U.S. introduces the new WAL 200 Series of hollow shaft angle sensors that provide absolute, rotary position. Sensor dimensions are 7 x 22 mm. The WAL 200 Series has a measurement range of 0 to 340°. Mechanical range is a continuous 0 to 360°.

Southborough, MA… Novotechnik, U.S. introduces the new WAL 200 Series of hollow shaft angle sensors that provide absolute, rotary position. Sensor dimensions are 7 x 22 mm.

The WAL 200 Series has a measurement range of 0 to 340°. Mechanical range is a continuous 0 to 360°.

Other key specifications include resolution of < 0.3°, repeatability of 0.3° and independent linearity of ±1 % of measurement range.

As an absolute sensor, the WAL 200 Series continues to track angle even if power is removed, reporting the correct position when power is restored.

WAL 200 Series sensors have a minimum life of 2 million mechanical movements. Cable and connector versions are available.

For more information contact Novotechnik U.S., Inc., 155 Northboro Road, Southborough, MA 01772 • Phone: 508-485-2244 • Fax: 508-485-2430 • Web: www.novotechnik.com/wal200

Featured Product

Servo2Go - Low-cost Tin-Can Stepper Motors from Nippon Pulse feature high torque and compact size

Servo2Go - Low-cost Tin-Can Stepper Motors from Nippon Pulse feature high torque and compact size

The PF/PFC series tin-can stepping motors are conventional magnet-driven rotary stepper motors with a permanent magnet in their rotor core. Rotating in proportion to the number of pulses sent to the motor, the stepper motor is frequency synchronized and can change speed depending on the frequency of the pulse signal.