Robotics, reshoring, and American jobs
By Charles Orlowek for The Hill: Good news? Boston Consulting Group foresees more large manufacturers boosting production for the American market by adding capacity in the U.S. itself, compared with any other country. It cites “decreasing costs and improved capabilities of advanced manufacturing technologies such as robotics." Under this optimistic scenario, how much value would American workers add? When robotics and other automation gets built for, and installed in American workplaces, where are jobs created?
Increasingly, these jobs are being created and sustained outside the United States, even for domestic factories.
The first industrial robots were developed and manufactured by Americans, and General Motors became the first user, in 1961. Over recent decades, however, the domestic robot industry has declined. A Commerce Department national security assessment from 1991 asserted that American robot manufacturers lost market share throughout the 1980s, with shipments of U.S.-manufactured robots falling by 33 percent between 1984 and 1989, despite robust domestic demand and a weak dollar. Cont'd...
Looking for a few good robots
By Adam Zewe for Harvard News: If you have a soft spot for robotics, this competition is right up your alley.
The 2016 Soft Robotics Competitions offer anyone with an interest in robotics the chance to design and build their own soft robot using the resources available in the open-source Soft Robotics Toolkit.
Now in its second year, the competition was developed by Conor Walsh, assistant professor of mechanical and biomedical engineering at the Harvard John A. Paulson School of Engineering and Applied Sciences, and Dónal Holland, visiting lecturer in engineering sciences, as a way to encourage individuals to take advantage of the resources provided in the Soft Robotics Toolkit.
The toolkit, which incorporates contributions from researchers from Harvard and other institutions, provides a set of intellectual tools that one can use to design and construct a robot using soft, flexible materials. It includes resources such as step-by-step instructions on building actuators and sensors, lists of suggested materials, and how-to fabrication videos.
The ultimate goal of the competition is to encourage others to find innovative applications for soft robotics technology and continue expanding interest in this relatively new field. Cont'd...
Lego's classroom robotics kit goes wireless
Ross Miller for The Verge: Lego's entry-level robotics set is getting an overhaul. The brickmaker today is announcing WeDo 2.0 for elementary classrooms, which will both teach science-related concepts and, more importantly, let children build and program Lego robots.
Designed to teach engineering and science, Lego Education's WeDo 2.0 kits contain about 280 Lego pieces, which also includes motion / tilt sensors and a motor. The new version eschews USB tethering for Bluetooth LE-powered "smarthub" brick that connects the sensors to a tablet or PC / Mac app. (The new version also has a more cohesive, more appealing color palette for all the bricks.) Each app includes a set of lessons, which tie in science concepts with a classic Lego construction manual. WeDo has a very simple drag-and-drop coding interface that lets students (or, to be honest, very enthusiastic adults) program basic functions. You can also, of course, just ignore the instructions entirely and build / program your own pastel robot. Cont'd...
Space Bots & Android Waste Collectors: What's Ahead for Robotics
By Elizabeth Palermo for LiveScience: It was a good year to be a robot.
In 2015, researchers in Korea unveiled a robotic exoskeleton that users can control with their minds, a four-legged bot in China set a new world record by walking 83.28 miles (134.03 km) without stopping and 3D-printing robots in Amsterdam started work on a new steel footbridge.
But these smart machines are capable of so much more. Researchers around the world are now designing and building bots that will complete more noteworthy tasks in 2016 and beyond. From exploring other planets to fighting fires at sea, here are a few skills that bots could pick up in the new year. Full Article:
What Robots and AI Learned in 2015
By Will Knight for MIT Technology Review: The robots didn’t really take over in 2015, but at times it felt as if that might be where we’re headed.
There were signs that machines will soon take over manual work that currently requires human skill. Early in the year details emerged of a contest organized by Amazon to help robots do more work inside its vast product fulfillment centers.
The Amazon Picking challenge, as the event was called, was held at a prominent robotics conference later in the year. Teams competed for a $25,000 prize by designing a robot to identify and grasp items from one of Amazon’s storage shelves as quickly as possible (the winner picked and packed 10 items in 20 minutes). This might seem a trivial task for human workers, but figuring out how to grasp different objects arranged haphazardly on shelves in a real warehouse is still a formidable challenge for robot-kind. Cont'd...
Watch these robotic 'reindeer' from Boston Dynamics pull Santa's sleigh
By Lulu Chang for Digital Trends: We’re going to rewrite Rudolph the Red-Nosed Reindeer, because now, it’s robotic dogs that are pulling Santa’s sleigh. In a rather frightening video, Google-owned robotics design firm Boston Dynamics has shown us the future of Christmas, and it’s plenty progressive, complete with machines and female Santas. I can get behind that sort of holiday, I think.
Of course, the Internet wasn’t so sure. And to be fair, the dog-like robots are a bit frightening. Large and, well, headless, these machines seem to hearken more to the Thestrals (the skeletal winged horses visible only to those who’ve witnessed death) of Harry Potter’s universe than the adorable reindeer that are supposed to transport jolly Saint Nick to and from the North Pole.
Google to incubate its robotics and drone divisions under Google X
By Mike Wheatley for SiliconAngle: Google is planning an organizational reshuffle that will see its secretive robotics department and drone business folded into its Google X labs.
Google’s robotics division, and the drone group it created when it acquired Titan Aerospace in 2014, will both fall under the Google X umbrella when the reshuffle takes place some time next year, Re/Code reported.
Google X is the secretive part of Google that develops some of its most futuristic, bleeding edge technologies. These include its famous self-driving cars, Project Loon (Wi-Fi hot air balloons), and its airborne wind turbines. Google X operates as a standalone company under Google’s parent Alphabet Inc., which was created following Google’s corporate restructuring earlier this year.
Google X’s projects are largely experimental and extremely uncertain in terms of a business model. Nevertheless, Google obviously deems it the best place to be for its robotics division, which has been left leaderless ever since Andy Rubin quit the Web giant last year. Previously, there was speculation that the robotics division may become a standalone company under Alphabet, but today’s news would indicate that’s not going to happen any time soon. Cont'd...
Four Market Forces That Will Shape Robotics Over The Next Year
Richard Mahoney for TechCrunch: As 2016 approaches, robotics is poised to traverse from a narrow set of industrial and military use cases to broader market applications that include commercial drones, telepresence robots, delivery robots and, of course, mobile vacuum cleaners.
But, are robots ready to be a part of our daily life?
Gill Pratt, a visionary who served as a program manager at the Defense Advanced Research Projects Agency (DARPA) and oversaw the DARPA Robotics Challenge, postulated earlier this year that robotics might soon be headed for a “Cambrian Explosion.”
The term refers to a period of time roughly half a billion years ago when the numbers and diversity of animals became critical to evolution. Pratt offered that technology developments are ushering in a similar upsurge in the diversification and applicability of robotics. Cont'd...
'Rushing into robotics revolution without considering impact,' warn scientists
From RT.com: Governments should examine the effects of robotics on human civilization before automated machines leap “out of factories to automate all aspects of our lives,” a group of scientists warns.
The Foundation for Responsible Robotics, launched on Friday in London, aims to persuade governments and industries to look at the ways robots will impact on society. They want organizations to look at the way robots could disrupt the job market, and believe policymakers have so far failed researched the issue.
Robotics professor at Sheffield University and Chairman of the foundation Noel Sharkey said the potential problems must be considered.
“We are rushing headlong into the robotics revolution without consideration for the many unforeseen problems lying around the corner. It is time now to step back and think hard about the future of the technology before it sneaks up and bites us.”
Sharkey said growing numbers of robots are being used in the service industry, whereas historically robots have usually been used to automate factory work. Cont'd...
'Darwin' the thinking robot teaches itself how to walk, just like a child
Andre Mitchell for ChristianToday: Just like a real human toddler, a robot is learning how to take baby steps inside a laboratory at the University of California Berkeley.
The state-of-the-art robot mimics the behaviour of a child so realistically that it also falls as it attempts to take its first steps.
What is even more impressive is that the robot, nicknamed "Darwin," is actually teaching itself how to walk, much like a little child.
The robot's developers, Pieter Abbeel and his team at UC Berkeley's Robot Learning Lab, explained that Darwin is not like other robots that are programmed to do only a set of things.
This robot has a neural network designed to mimic the human brain, through which it undergoes the process called "reinforcement learning."
"Imagine learning a new skill, like how to ride a bike. You're going to fall a lot, but then, after some practice, you figure it out," one of Darwin's developers, computer scientist John Schulman, explained in an article on NBC News. Cont'd ...
IREX - Meet the Japanese robots that do what humans can't
By Sam Byford for The Verge: Nearly half the jobs in Japan could be performed by robots in a decade or two, according to a recent study by Nomura Research Institute. If that's the case, then the International Robot Exhibition — IREX for short — is going to be the best place possible to get a glimpse of Japan's future.
Held in Tokyo once every two years since 1973, IREX is the biggest robot show in the world, and it features everything from cute communication bots to immensely powerful industrial machinery. Companies like Fanuc, which makes robot factory equipment used by Apple and Tesla but generally stays out of the spotlight, take center stage at IREX to demonstrate how effortlessly their articulated arms can pick up entire cars.
It's a show where online video companies' dancing idol robots rub shoulders with government-sponsored androids designed to save lives in natural disasters. As you might imagine, it's quite the place to walk around. Cont'd...
On Cyber Monday, Friendly Robots Are Helping Smaller Stores Chase Amazon
DAVEY ALBA for Wired: Locus Robotics is an offshoot of Massachusetts-based Quiet Logistics, a third-party order fulfillment company that gets merchandise out the door for big apparel retailers like Zara, Gilt Groupe, and Bonobos. And the idea behind its bots isn’t just to replace humans, but to create a system where everyone can work together more efficiently.
What most people don’t realize in the age of push-button shopping is the “shopping” part doesn’t disappear. You the consumer are no longer at the store doing the physical work of tracking down the thing you want. But somebody still has to do it. For e-commerce, that task typically falls to a worker at a distribution center who must locate the product, make sure it’s not damaged, and send it off to be packed and shipped. This can be grueling, tedious work. More than anything else, it’s about walking. Lots of walking. Locus aims to have its bots do the walking instead. Cont'd...
Amazon's robotics group asked the FCC to test special wireless equipment
Jillian D'Onfro for Business Insider: Amazon is ramping up its robotics efforts and testing new technology that could make it safer to operate the fleet of robots toiling in its warehouses, according to recent FCC filings.
The FCC gave Amazon Robotics an expedited experimental license to test a "proximity sensing system" that the company hopes to deploy in fulfillment centers outside the U.S.
Amazon Robotics "seeks to evaluate radiolocation technology to be used in the operation of robotics in fulfillment centers outside the United States," the company said in the filing, the first such FCC filing by Amazon Robotics.
While Amazon stresses that the technology is strictly for internal use, and not something it intends to sell to "end users," the filing underscores the company's increasing investment and innovation in robotics, which has the potential to transform a broad swath of industrial and consumer markets. Cont'd...
Simbe Robotics launches new retail robot
By Silicon Valley Robotics via Robohub: The area of service robotics is getting active, with a new retail robot startup launching today. Tally is one of several robotics startups launching today at Haxlr8r’s 7th Demo Day. Tally is an inventory tracking robot platform fromSimbe Robotics and the “world’s first robotic autonomous shelf auditing and analytics solution” according to the press release.
Tally is in trials with several North American retailers and will traverse aisles scanning and auditing merchandise to help stores maintain ideal product placement, fill inventory gaps, and find misplaced or mispriced items. Tally is also capable of autonomously returning to base to charge.
“When it comes to the retail industry, shopper experience is everything. If a product is unavailable at the time the shopper wants to buy it, the retailer has missed an opportunity and disappointed their customer,” according to Brad Bogolea, CEO and Co-founder of Simbe Robotics. “Tally helps retailers address these challenges by providing more precise and timely analysis of the state of in-store merchandise and freeing up staff to focus on customer service.” Cont'd...
Toyota Invests $1 Billion in AI and Robots, Will Open R&D Lab in Silicon Valley
By Erico Guizzo and Evan Ackerman for IEEE Spectrum: Today in Tokyo, Toyota announced that it is investing US $1 billion over the next five years to establish a new R&D arm headquartered in Silicon Valley and focused on artificial intelligence and robotics. The Toyota Research Institute (TRI) plans to hire hundreds of engineers to staff a main facility in Palo Alto, Calif., near Stanford University, and a second facility located near MIT in Cambridge, Mass.
Former DARPA program manager Dr. Gill Pratt, an executive technical advisor at Toyota, was named CEO of TRI, which will begin operations in January. Toyota president Akio Toyoda said in a press conference that the company pursues innovation and new technologies “to make life better for our customers and society as a whole,” adding that he wanted to “work with Gill not just because he’s an amazing researcher and engineer, but because I believe his goals and motivations are the same as ours.” Cont'd...
Records 196 to 210 of 267
First | Previous | Next | Last
Personal & Service Robots - Featured Product
ST Robotics - R17HS-6, the 6-axis version of the high speed R17 variant
The 6-axis version of the R17HS high speed variant of the R17 robot is now available. As is our policy the 6th axis is an optional bolt-on module. At the same time we have made it even faster and new software eliminates shake and greatly improves repeatability as this video shows. Please see https://www.youtube.com/watch?v=3wG0MeiJ-yE. The video would seem to imply a repeatability of 0.01mm but we are sticking with 0.2mm in the spec. The motor specialist was able to tune the motors from the other side of the pond. My first reaction when we put power on and entered the first commands was to jump back in amazement (and maybe an expletive). Tip speed is now 3m/s; that's 3 times as fast as its nearest competitor yet costs half the price. I love it when a plan comes together.
