Residential Robotic Vacuum Cleaner Market - Global Industry Analysis and Forecast to 2020
Persistence Market Research Pvt. Ltd is released new forthcoming report on title "Residential Robotic Vacuum Cleaner Market: Global Industry Analysis and Forecast to 2020".
Why and How to Use Membrane Potentiometers Instead of Traditional Linear and Rotary Position Sensors New Hoffmann-Krippner Whitepaper
Complex sensor assemblies can be reduced, simplified and integrated less expensively with modern membrane potentiometers
Fetch Robotics Unveils Robotics System for Logistics Industry
More and more, when consumers or businesses place an order they want those items delivered immediately. Between services such as Amazon Prime, Google Express, eBay Now, and the continuing growth of e-commerce, there is a consumer expectation of speed and efficiency that is putting significant pressure on the role of logistics and e-commerce warehouses. To address this challenge, Fetch Robotics today introduced a robotics system designed for the logistics industry.
DroneDeploy and DJI Announced as Platinum Sponsors of Drone World Expo
Dozens of Leading Industry Companies Sign On to Exhibit at the Silicon Valley Based Event
AltEnergyMag.com launches a newly designed website
Approaching 13 years online, www.AltEnergyMag.com has revamped its website design for easier navigation and better compatibility with mobile devices.
HomeToys.com launches a newly designed website
Approaching 19 years online, www.HomeToys.com has revamped its website design for easier navigation and better compatibility with mobile devices.
InterDrone: DIY Drones Founder and 3D Robotics CEO to Deliver Keynote Address
BZ Media LLC announced today that Chris Anderson, New York Times best-selling author, CEO of 3D Robotics, and founder of DIY Drones will deliver a keynote address at InterDrone, being held September 9, 10, 11 at The Rio in Las Vegas. Andersons keynote is scheduled for the morning of September 10. More than 3,000 drone builders, flyers and buyers are expected to attend the largest annual event bringing together all the key participants in the growing market for commercial drone aircraft.
LORD MicroStrain Introduces New Family of 10°/hour Miniature Inertial Sensors
"The 3DM-GX4 family's 10°/hour gyro bias stability and industrial grade MEMS sensors clearly set them apart in the field of miniature inertial sensor systems."
Trimble Adds Unmanned Aircraft System to its Agriculture Portfolio for Aerial Imaging and Mapping
The Trimble UX5 system flies at 80 kilometers/hour (50 mph) and is stable in significant crosswinds and even light rain.
LMI Technologies Launches New Gocator All-In-One 3D Smart Snapshot Sensor
Gocator 3100 series delivers 3D point cloud acquisition, measurement, and control decision capabilities in a single package
LORD MicroStrain® Sensing Systems Introduces Cost-Effective Tactical-Grade GPS-Aided Inertial Navigation System
Achieves tactical-grade performance with the smallest and lightest package in its class
Humanistic Robotics Announces Product Launch and First Users of its Safe Remote Control System
Advanced, ergonomic controller utilizes HRI's proprietary SafetySenseTM technology
MMP Releases 48V DC Gearmotor: 18 IN Lbs of continuous torque at 782 RPM, 354 In Lbs Peak Torque
27 April 2012: "IP-54" Sealed, High Power, 48 Vdc Gearmotor Develops 18 Lb. In. Torque at 782 RPM
Midwest Motion Products of Watertown, Minnesota, is pleased to announce the release of a new DC Gear- Motor, Model #: MMP-D33-455D-48V GP81-03.7 - Accepting any 48 Volt DC source, including battery power, this robust Gear Motor measures just 3.2" (max) Diameter, by 8.4" long and has a keyed output shaft of 19mm diameter by 40mm long. Easy mounting is accomplished with 4 "face mount" M6 threaded holes, equally spaced on a 65mm Dia. B.C. or an optional NEMA34 Flange, as shown on the attached Photo.
The output of this fully reversible gearmotor is rated for 18 IN-LBS continuous torque, at 782 RPM, and 354 IN-LBS Peak. Despite its compact size, and weight of approximately 10 pounds, it's an efficient design, requiring just 5.1 Amps at 48 Volts DC to generate its Full-Load Torque. This translates into longer battery charge, very LOW-NOISE operation, and lower cost drive electronics. Motor windings for 12v, 18v, 24v, 28v, 36v, 42v, 60v & 90 Volts are available.
MMP Inc Releases New 12V DC Gearmotor capable of 136 Lb In of torque aat 35 RPM, with IP54 Rating
03 Sept 2011: "IP-54" Sealed, Low Current, 12 Vdc Gearmotor Develops 136 Lb. In. Torque at 35 RPM
Midwest Motion Products, Inc. of Watertown, Minnesota, is pleased to announce the release of a new DC Gear Motor, the Model No. MMP TM57-12V GP52-124. Accepting any 12 Volt DC source, including solar or battery power, this robust Gear Motor measures just 2.24" in Diameter, by 7.76" long, and has a keyed output shaft of 12mm diameter by 25mm long. Easy mounting is accomplished with 4 "face mount" M5 threaded holes, equally spaced on a 40mm Dia. B.C.
The output of this reversible gearmotor is rated for 136 Lb. In. (15.3Nm) torque, at 35 RPM. Despite its compact size, and weight of approximately 4 pounds, it's an efficient design, requiring just 7.2 Amps at 12 Volts DC to generate its Full Load Torque. That translates into long life battery charge, very low noise operation, and lower costs for related drive electronics. Motor windings for 24V, 28V, 36V, 42V, 48V, 60V & 90 Volts are available.
This unique design is rated at an "IP 54" protection level for operation in harsh environments. Variable Speed control can be accomplished with our fully compatible Speed Controls, Model MMP 25A-12V, or
MMP Releases new 12V DC Gearmotor - 136 In Lbs torque at 140 RPM output speed
Midwest Motion Products of Watertown, Minnesota, is pleased to announce the release of a new DC Gear- Motor, Model # MMP-D33-455A-12V GP81-029 - Accepting any 12 Volt DC source, including battery power, this robust Gear Motor measures just 3.2" (max) Diameter, by 9.25" long and has a keyed output shaft of 19mm diameter by 40mm long. Easy mounting is accomplished with 4 "face mount" M6 threaded holes, equally spaced on a 65mm Dia. B.C. or an optional NEMA34 Flange, is also available.
The output of this fully reversible gearmotor is rated for 136 IN-LBS continuous torque, at 140 RPM, and 1062 IN-LBS (120 Nm) Peak Torque. Despite its compact size, and weight of approximately 11 pounds, it's an efficient design, requiring just 28.6 Amps at 12 Volts DC to generate its Full-Load Torque. This translates into long battery charge, very LOW-NOISE operation, and lower cost drive electronics. Motor windings for 18v, 24v, 28v, 36v, 42v, 48v, 60v & 90 Volts are available.
Records 1951 to 1965 of 1968
First | Previous | Next | Last
Featured Product
Oriental Motor USA - Ideal for AGV/AMR Applications
The BLV Series R Type brushless DC motor (BLDC motor) speed control system offers the design of motor and driver significantly reduced in size and weight, yet high-power, and contributes to the battery driven automation. The BLV Series R Type is compatible with the two interfaces of Modbus (RTU) and CANopen communication.
