Climbing, Gecko-Like Robot by SFU Researchers Can be Useful in Space

The sticky feet of a climbing, gecko-like robot developed by SFU researchers could be useful in space, international tests show.

The SFU research was recently tested in the labs of the European Space Agency (ESA), which has co-sponsored the project since 2008.


SFU engineering scientist Carlo Menon says his team developed techniques similar to those used in the microelectronics industry to create "footpad terminators" much like the nanoscopic hairs on a gecko's feet. A dry adhesive created to complete the process was then tested in space-like conditions.

The climbing robot, dubbed Abigaille, features six legs, each with four degrees of freedom for optimum agility, allowing the robot to get around obstacles by crawling vertically or horizontally.

The research has involved multiple SFU undergraduate, master's and PhD students, as well as postdoctoral fellows. Former master's student Michael Henrey carried out testing of the robots in ESA's Electrical Materials and Process Lab in the Netherlands.

The ESA has issued a news release about the testing and Menon will have a paper published this month in the Journal of Bionic Engineering.

Since joining SFU in 2007, Menon's research program has focused on bio-robotics and smart materials.

In 2008 he was awarded a grant from the Natural Sciences and Engineering Research Council and a contract from ESA to develop climbing robotic systems.

"This research followed two distinct research milestones-the development of dry adhesives and the development of innovative locomotion systems," Menon explains, noting the robots could potentially be used for everything from cleaning high rises to servicing satellites and even planetary exploration.

Menon is also designing an interactive wearable robotic device to improve the quality of life for those who have lost control of their arms and hands due to stroke, injury, aging or disease.

The space research was supported by ESA's Network/Partnering Initiative for universities carrying out research with the potential for space applications.

http://www.sfu.ca

Featured Product

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow has offered a Camera Link frame grabbers for almost 15 years. This latest offering, our 6th generation combines the power of CoaXPress with the requirements of Camera Link 2.0. Enabling a single or two camera system to operate at up to 850 MB/S per camera, the Axion-CL family is the best choice for CL frame grabber. Like the Cyton-CXP frame grabber, the Axion-CL leverages features such as the new StreamSync system, a highly optimized DMA engine, and expanded I/O capabilities that provide unprecedented flexibility in routing. There are two options available; Axion 1xE & Axion 2xE. The Axion 1xE is compatible with one base, medium, full or 80-bit camera offering PoCL, Power over Camera Link, on both connectors. The Axion 2xE is compatible with two base, medium, full or 80-bit cameras offering PoCL on both connectors for both cameras. The Axion-CL is a culmination of the continuous improvements and updates BitFlow has made to Camera Link frame grabbers.