MICROMO Introduces the new FAULHABER 3890 CR DC Motor

Another benchmark for power and performance

MICROMO is pleased to announce the latest addition to the FAULHABER CR DC Motor series. Its graphite commutation, powerful neodymium magnet and particularly high copper content in the FAULHABER rotor winding provide the compact 3890 CR with an enormous amount of power.


For drives in applications such as autonomous robot system and electro-mechanical orthotic systems and exoskeletons, high dynamics and torque in the smallest possible space are central requirements. In addition to the one-of-a-kind power density (rated torque per volume), the high efficiency of the 3890…CR series is also a decisive factor. Thanks to the further development of the commutation system, the motor also achieves high service life values even with extremely heavy loads. The coreless rotor also ensures cogging-free, precise synchronization with very low energy consumption. The 3890…CR series offers everything required for use in challenging power applications.

The new 3890…CR DC-Motors series is available as standard with four nominal voltages: 18 V, 24 V, 36 V and 48 V. A continuous torque of up to 224 mNm is also part of the performance package. The short-term torque, required for many applications, is much higher. With no-load speeds of just over 5,000 rpm, the motors are optimally tailored for combination with FAULHABER gearheads. The standard drive can be combined with an IE3-1024 (L) three-channel encoder or optionally with optical encoders from the HEDx series for applications with precise speed controllers or positioning tasks.

Please contact the MICROMO Team for more information.

Featured Product

ST Robotics Develops the Workspace Sentry for Collaborative Robotics

ST Robotics Develops the Workspace Sentry for Collaborative Robotics

The ST Robotics Workspace Sentry robot and area safety system are based on a small module that sends an infrared beam across the workspace. If the user puts his hand (or any other object) in the workspace, the robot stops using programmable emergency deceleration. Each module has three beams at different angles and the distance a beam reaches is adjustable. Two or more modules can be daisy chained to watch a wider area. "A robot that is tuned to stop on impact may not be safe. Robots where the trip torque can be set at low thresholds are too slow for any practical industrial application. The best system is where the work area has proximity detectors so the robot stops before impact and that is the approach ST Robotics has taken," states President and CEO of ST Robotics David Sands.