New Profile Rail Linear Recirculating Bearings from Lintech
Lintech's MR, ARC & HRC Profile Rail Linear Recirculating Bearings incorporate two or four rows of re-circulating balls arranged in a 45 degree contact angle with the raceway.
Lintechs MR, ARC & HRC Profile Rail Linear Recirculating Bearings incorporate two or four rows of re-circulating balls arranged in a 45 degree contact angle with the raceway. The rigidity under moment and torsional loads is increased by this design. Larger ball size is used to enhance the load capabilities. This design offers equal loading in all directions while providing smooth motion. Features of the MR, ARC & HRC series include:
• Size 15, 20, 25, 30, 35, 45 available in N, H and P accuracy grades
• V0, V1 and V2 block pre-loading options for most models
• Short/Normal/Long block lengths available with Normal and Flange width styles
Lintechs family of cost-effective short-delivery Profile Rail Linear Bearings includes:
MR Series - Miniature Profile Rail Linear Guides featuring:
• 2 rows of re-circulating balls
• Equal loading in all directions
• Dust proof design
• SS bearing, rail, and balls
• Self-lube reservoir standard
________________________________________
ARC Series - Standard Profile Rail Linear Guides featuring:
• Application Rail
• 4 rows of re-circulating balls
• Equal loading in all directions
• Dust proof design
• Alloy steel bearing, rail, and balls
• Self-lube reservoir optional
________________________________________
HRC Series- Heavy Profile Rail Linear Guides featuring:
• Heavy Load Rail
• 4 rows of re-circulating balls
• Equal loading in all directions
• Dust proof design
• Alloy steel bearing, rail, and balls
• Self-lube reservoir optional
For more information, please contact:
EDITORIAL CONTACT:
Warren Osak
sales@electromate.com
Toll Free Phone: 877-737-8698
www.electromate.com
Tags: Profile Rail, Linear Recirculating Bearings, Lintech, Electromate, Square Rail
Featured Product
REIKU's Cable Saver™ - The Most Versatile Modular Robotic Cable Management Solution
REIKU's Cable Saver™ Solution eliminates downtime, loss of revenue, expensive cable and hose replacement costs, maintenance labor costs. It's available in three sizes 36, 52 and 70 mm.
All of the robots cables and hoses are protected when routed through the Cable Saver™ corrugated tubing.The Cable Saver™ uses a spring retraction system housed inside the Energy Tube™ to keep this service loop out of harms way in safe location at the rear of the Robot when not required. The Cable Saver™ is a COMPLETE solution for any make or model of robot. It installs quickly-on either side of the robot and has been tested to resist over 15 million repetitive cycles.
REIKU is committed to providing the most modular, effective options for ensuring your robotic components operate without downtime due to cable management.
www.CableSaver.com
