Renice mSATA SSD for Factory Automation

Renice X5A mSATA SSD is a Mini PCIe SSD with SATAIII (6.0Gb/s) interface. Using MLC and SLC NAND Flash memory chips as storage media, provides high performance and reliability in harsh environments such as wide temperature, shock, vibration, dust, and so on. Renice industrial mSATA solid-state drive conforms to JEDEC MO-300 industry standard and supports wide SSD temperature operation, power loss protection, overvoltage and overcurrent protection. Industrial mSATA SSD's excellent stability and durability, can be widely used in various embedded applications, such as aviation, rail transportation, marine equipment, data center, surveillance, and factory automation.

Renice X5A mSATA SSD is a Mini PCIe SSD with SATAIII (6.0Gb/s) interface. Using MLC and SLC NAND Flash memory chips as storage media, provides high performance and reliability in harsh environments such as wide temperature, shock, vibration, dust, and so on. Renice industrial mSATA solid-state drive conforms to JEDEC MO-300 industry standard and supports wide SSD temperature operation, power loss protection, overvoltage and overcurrent protection. Industrial mSATA SSD's excellent stability and durability, can be widely used in various embedded applications, such as aviation, rail transportation, marine equipment, data center, surveillance, and factory automation.


Basic Information
Standard Serial ATA: SATA III, 6.0Gbps (Backward compatible with SATA 1.5 and 3.0Gbps)
Form Factor: mSATA 50.95mm X 30mm X 3.65mm (L x W x H)
Connector: 52pin SATA-based mSATA pinout
Density: 128GB~1TB (MLC SSD); 16GB~256GB (SLC SSD)
Input Voltage: 3.3V (±5%)
Type: Industrial SSD

Performance
Max Sequential Data Read/Write: 550MB/400MB/s
Access Time: <0.1ms
MTBF: >3,000,000 Hours @25C
Data Retention: JESD47 compliant
4Kb Random Read/Write IOPS: 70,000 / 75,000

Flash Memory Management
Flash Management Algorithm: Static and dynamic wear-leveling, bad block management algorithm
Supports Dynamic Power Management and SMART: √
BCH ECC: 66bits in 1KBytes

Other Functions
Power Failure Protection: √
Over Voltage Protection: √
TRIM: √
NCQ: √

Environment
Temperature ranges: Operation: -40°C to +85°C; Storage: -50°C to +95°C
Humidity: 5-95%
Vibration: 10Hz-2000Hz, 16.4 G (X, Y, Z axis, 1 hour /axis)
Shock: Peak Acceleration: 1,500 G, 0.5ms (Half-sine wave, ±X,±Y,±Z axis, 1 time/axis); Peak Acceleration: 50 G, 11ms (Half-sine wave, ±X,±Y,±Z axis, 3 times/axis)

Featured Product

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow Introduces 6th Generation Camera Link Frame Grabber: The Axion

BitFlow has offered a Camera Link frame grabbers for almost 15 years. This latest offering, our 6th generation combines the power of CoaXPress with the requirements of Camera Link 2.0. Enabling a single or two camera system to operate at up to 850 MB/S per camera, the Axion-CL family is the best choice for CL frame grabber. Like the Cyton-CXP frame grabber, the Axion-CL leverages features such as the new StreamSync system, a highly optimized DMA engine, and expanded I/O capabilities that provide unprecedented flexibility in routing. There are two options available; Axion 1xE & Axion 2xE. The Axion 1xE is compatible with one base, medium, full or 80-bit camera offering PoCL, Power over Camera Link, on both connectors. The Axion 2xE is compatible with two base, medium, full or 80-bit cameras offering PoCL on both connectors for both cameras. The Axion-CL is a culmination of the continuous improvements and updates BitFlow has made to Camera Link frame grabbers.