Novotechnik - Auto-Racing Proven Angle Sensors
Key specifications for SP2800 Auto Sport include 20 models covering measurement ranges of 0 to 100°, 130°, 308°, 345° or 350°. There is also a redundant version with a 100° range.
Southborough, MA - Novotechnik U.S. announces the SP2800 Auto-Sport Series of rotary sensors for angle measurement. These sensors were developed for auto racing and other demanding applications. Their durability can benefit industrial applications.
Key specifications for SP2800 Auto Sport include 20 models covering measurement ranges of 0 to 100°, 130°, 308°, 345° or 350°. There is also a redundant version with a 100° range. These ranges were specifically selected for sequential gearbox, steering angle, throttle and suspension measurement applications. Repeatability is 0.01%. Linearity is to 0.3 % depending on model.
The SP2800 Auto-Sport Series is hermetically sealed, without any moving seals, to IP67 and provides long life of ≥ 50 million cycles even in water, dust and oil environments. They can be ordered with plastic or aluminum housings. Temperature drift is 5 ppm/K. Vibration the parts will operate under is up to 20 g.
Operating temperature range of the SP2800 Auto Sport is -40 to +150 °C that converts to -40 to +302 °F. They have compact designs of 1.1 inch diameter. Mechanical coupling is with either push-on or 6 mm shaft. Viton boot or aluminum connectors can be ordered and are sold separately.
For more information on the SP2800 Auto-Sport Series contact Novotechnik U.S, Inc, Phone: 508-485-2244 · E-mail: info@novotechnik.com · Web: www.novotechnik.com/sp2800
Featured Product
US Digital's New L2 Low Profile Motor Encoder
The L2 incremental encoder uses US Digital's proven EM1 optical encoder module and disk, which has billions of device-hours of dependable service in customer applications. This product continues US Digital's strong reputation for reliable, field-tested encoders. The L2 is US Digital's lowest height encoder that uses the EM1 module. It has a 0.75 in. bolt-spacing mount. The maximum resolution is 1250 CPR (5000 PPR with quadrature). The L2 comes with a single-ended output. Another benefit of the L2 incremental encoder is its fast installation. The cover snaps onto the base to secure the module. It is designed for use with a high-retention connector or cable (sold separately). Like all US Digital products, the L2 is designed and manufactured in Vancouver, Washington, USA. It is backed by prompt access to our technical and customer service teams with same-day shipping on most orders.
