The challenges around outdoor snow removal are two-fold. First, businesses and commercial sites must keep walkways and pathways clear for safety reasons and they face a labor shortage of those willing and able to do such incremental work.

Swift Navigation Case Study: Left Hand Robotics
Swift Navigation Case Study: Left Hand Robotics

Contributed by | Swift Navigation

Left Hand Robotics was founded with the mission to produce safe, reliable autonomous robots designed to perform physically demanding outdoor tasks. Based in Longmont, Colorado, Left Hand Robotics’ innovative automation and advanced technology solutions for outdoor operations allow businesses to reduce labor costs. The Left Hand Robotics founding team brings over five decades of experience in software and robotics to address difficult problems such as snow removal.



The challenges around outdoor snow removal are two-fold. First, businesses and commercial sites must keep walkways and pathways clear for safety reasons and they face a labor shortage of those willing and able to do such incremental work. This challenge is addressed by looking at autonomous solutions that do not require physical labor to complete snow removal tasks. Second, creating an autonomous robotic solution that can perform the task has limited margins for navigation error. Often, sidewalks and walkways have landscaping, walls, curbs and other obstacles that would be damaged were a robot to run over or into it. GNSS technology with centimeter-level accuracy is required to ensure a robot avoids obstacles and stays on its designated route.



Left Hand Robotics found real-time kinematics (RTK) GNSS to be the solution to its centimeter-level accuracy needs. This level of accuracy keeps the robot in its designated path and allows its base robot platform to navigate in a variety of environments—whether in lines (e.g., sidewalks, bike paths) or large open areas (e.g., fields, parks). Finding a reliable RTK GNSS solution was critical given that many sidewalks are near buildings and underneath trees.

Swift Navigation’s Piksi Multi is the solution to Left Hand Robotics’ navigation needs and allows it to achieve the desired accuracy and retain a GNSS-fix in challenging conditions and environments. Initially Left Hand Robotics tested a competitive product, but it did not meet performance requirements. After continued evaluation, Left Hand Robotics selected Piksi Multi as its GNSS solution due to both its performance and affordable price. Once Swift’s ruggedized Duro receiver was launched—and could be used by customers as a base station that was required for RTK—Left Hand Robotics had a complete offering for customers. Piksi Multi is installed in each SnowBot Pro and its Path Collection Tools (the tool their customers use to collect the initial path data that the robot will follow) and Duro is used as the base station controlling the SnowBot Pro robot.



SnowBot Pro became available in Winter 2018-2019 and is the only commercialgrade, robotically-driven product for snow removal on the market. Its autonomous capabilities allow SnowBot Pro to clear snow from walkways with a 56” wide rotating brush, reducing the number of hand shovelers or snow blower operators needed by up to 80%. Its different attachments for both the front and the rear of the robots allow for a multitude of tasks—snow removal in the front and deicing in the rear. The SnowBot is programmed and then controlled remotely from the cloud via an online dashboard or mobile app and follows its programmed path using GPS, accelerometer and gyroscope technologies for navigation. Sensors detect any obstacles and can instruct the robot to stop to avoid collisions and send instructions about how to bypass obstacles. Location, weather and robot status data is recorded in real time, including before and after photos. This detailed recording helps to minimize insurance and risk management costs that snow removal companies face from potentially costly Slip & Fall insurance claims, while at the same time providing customers with proof of work.


The content & opinions in this article are the author’s and do not necessarily represent the views of RoboticsTomorrow
Swift Navigation

Swift Navigation

Swift's GNSS solutions deliver an order-of-magnitude higher precision at a fraction of the cost of traditional GPS solutions and are designed and assembled in California, USA. With customers around the world, Swift is already at work navigating an automated future in autonomous vehicles, UAV, robotics, survey, control, agriculture and other industries.

Other Articles

Swift Navigation Case Study:
Yeti Snow Technology
Yeti has the goal to develop an autonomous snow clearing service for use on future airports. The product will be introduced in steps, in parallel with the development of technology for self-driving vehicles.
Swift Navigation Case Study: Prairie Robotics
The Spraybot delivered inch-accurate positioning and instantaneous heading. Its autonomous navigation had built-in obstacle selection and avoidance. It was designed to both detect and identify plants and rows and deliver spot spraying.
Swift Navigation Case Study: Northstar Robotics
By coupling its cloud and open autonomy platforms to disrupt agriculture, Northstar Robotics is on track to solve farm labor shortages and reduce farm input costs.
More about Swift Navigation

Comments (0)

This post does not have any comments. Be the first to leave a comment below.

Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

TUV Rheinland Robot Integrator Program

TUV Rheinland Robot Integrator Program

The industry's first comprehensive Robot Integrator Program saves robot integrators significant time and cost investments by allowing them to mark each cell compliant with ANSI/RIA R15.06 with the TUV Rheinland Mark. As opposed to a traditional certification or an on-site field labeling, TÜV Rheinland's Robot Integrator Program certifies the knowledge and skill-set of robot integrators in addition to testing robotic cells and processes against ANSI/RIA R15.06. This reduces the need for frequent onsite or off site testing and allows manufacturers to apply a single TÜV Rheinland label to multiple cells. The Robot Integrator Program individually assesses a robot integrator's understanding of the ANSI/RIA R15.06 standard along with the ability to consistently produce compliant robot cells. Following the requirements and procedures of the new program will enable robot integrators to produce individually compliant robotic cells under one serialized TÜV Rheinland Mark, which meets the national electric code and allows acceptance by Authorities Having Jurisdiction (AHJ) and end users.