Novotechnik - New Position Sensor For Hydraulic and Pneumatic Applications
Designed for continuous use at operating pressures up to 350 bar, the Novotechnik TH1 touchless sensors are readily integrated into high-pressure hydraulic and pneumatic cylinders. TH1 transducers provide direct, precise, and absolute measurements from 100 to 4,250 mm with single or multiple position markers.
Southborough, MA…Designed for continuous use at operating pressures up to 350 bar, the Novotechnik TH1 touchless sensors are readily integrated into high-pressure hydraulic and pneumatic cylinders. TH1 transducers provide direct, precise, and absolute measurements from 100 to 4,250 mm with single or multiple position markers.
Analog output options for the TH1 Series are 0.1 to 10 VDC, 0.1 to 20 mA and 4 to 20 mA. Digital interfaces include SSI and Start/Stop.
The TH1 series is highly resistant to shock and vibration - up to 100 g and 20 g respectively. Other key specifications include: Sealing to IP 68, linearity to 10µm, resolution to 1 µm regardless of stroke length, reproducibility to 6 µm and compression peaks to 600 bar.
Applications for the TH1 sensor include fluid power valve position, liquid level measurement, off road agriculture and construction as well as other mobile equipment.
For more information on the TH1 series contact Novotechnik U.S., Inc. via website: www.novotechnik.com/th1 or phone: 508-485-2244.
Featured Product
US Digital's New L2 Low Profile Motor Encoder
The L2 incremental encoder uses US Digital's proven EM1 optical encoder module and disk, which has billions of device-hours of dependable service in customer applications. This product continues US Digital's strong reputation for reliable, field-tested encoders. The L2 is US Digital's lowest height encoder that uses the EM1 module. It has a 0.75 in. bolt-spacing mount. The maximum resolution is 1250 CPR (5000 PPR with quadrature). The L2 comes with a single-ended output. Another benefit of the L2 incremental encoder is its fast installation. The cover snaps onto the base to secure the module. It is designed for use with a high-retention connector or cable (sold separately). Like all US Digital products, the L2 is designed and manufactured in Vancouver, Washington, USA. It is backed by prompt access to our technical and customer service teams with same-day shipping on most orders.
