Oriental Motor Introduces PKP Standard 2-Phase Stepper Motor with NEW Oriental Motor Original Encoder and New Higher Torque PKP22_ Series 28 mm (1.10 in.) Motor

Performance Driven High Torque Stepper Motors for the Optimum Application Results

Oriental Motor is pleased to introduce our new 1.8° and 0.9° PKP Series 2-Phase stepper motor, the leading stepper motor in the market, now preassembled with new Oriental Motor Original Encoders.


The new Original Encoder PKP Series is a complete product line introduction that includes both bipolar and unipolar motors. Specifications for the Oriental Motor Original Encoders are 3-channel, Incremental or Line Driver type, 200 p/rev for 1.8° and 400 p/rev for 0.9° type. To reduce electrical noise, a Line Driver type is also available.

Additionally, new higher torque PKP22_ Series 28 mm (1.10 in.) stepper motors are also released. The PKP223 and PKP225 high torque stepper motors continue to lead the industry with the highest torque in a compact frame size at 28 mm (1.10 in.).

The new PKP Series with new Oriental Motor Original Encoder is available in the following frame sizes: 20 mm (0.79 in.) to 56.4 mm (1.65 in.) in 1.8° motor type or 42 mm (1.65 in.) and 56.4 mm (2.22 in.) in 0.9° motor type and available in both bipolar and unipolar configurations.

The PKP Series with new Oriental Motor Original Encoders key features are:

* Pre-assembled to save time and money
* Motor position information detection
* 3-Channel Output Signal: A-Phase, B-Phase, Z-Phase
* Resolution: 200 P/R (1.8° Standard motor) or 400 P/R (0.9° High-Resolution motor)
* Reduced electrical noise with Line Driver Output type
* Compact encoder contributes to overall space savings

Visit our web site to learn more about the new PKP Series with Oriental Motor Original Encoders and other stepper motors at http://www.orientalmotor.com/products/stepper-motors/stepper-motor-only.html

ABOUT ORIENTAL MOTOR
Since its founding in Japan in 1885, Oriental Motor has been a world leader in motion systems. For over a century we have concentrated on technological advancement and product design improvement—an emphasis evident in the sophisticated devices we market today. Oriental Motors sales and service network is international, with offices throughout North America, Europe and Asia. Domestically, ORIENTAL MOTOR U.S.A. CORP. was established in 1978.

Featured Product

ST Robotics Develops the Workspace Sentry for Collaborative Robotics

ST Robotics Develops the Workspace Sentry for Collaborative Robotics

The ST Robotics Workspace Sentry robot and area safety system are based on a small module that sends an infrared beam across the workspace. If the user puts his hand (or any other object) in the workspace, the robot stops using programmable emergency deceleration. Each module has three beams at different angles and the distance a beam reaches is adjustable. Two or more modules can be daisy chained to watch a wider area. "A robot that is tuned to stop on impact may not be safe. Robots where the trip torque can be set at low thresholds are too slow for any practical industrial application. The best system is where the work area has proximity detectors so the robot stops before impact and that is the approach ST Robotics has taken," states President and CEO of ST Robotics David Sands.