Oriental Motor Introduces PKP Series Standard 2-Phase 1.8° and 0.9° Stepper Motor with Electromagnetic Brake

Leading the stepper motor market, now with power-off activated electromagnetic brakes

Oriental Motor is pleased to introduce our new 1.8° and 0.9° PKP Series 2-Phase stepper motor, the leading stepper motor in the market, now preassembled with new Oriental Motors Original Electromagnetic Brake.


The new PKP Series stepper motors are now available with built-in power-off activated electromagnetic brakes. When power is accidentally cut off due to unexpected events, such as a black out, the electromagnetic brake holds the load in position to prevent it from moving. When the motor is at standstill, it can be held by the electromagnetic brake. The electromagnetic brake can also be used to suppress the heat generated from the motor by switching off the motor current and using the brake as the holding function.

The new PKP Series stepper motors with Electromagnetic Brake type is available in both bipolar and unipolar configurations and in the following frame sizes: 35 mm (1.38 in.), 42 mm (1.65 in.) and 56.4 mm (2.22 in.). PKP26_ models (56.5 mm/2.22 in. frame size) comes with an 8 mm shaft.

The PKP Series with new Oriental Motor Original Electromagnetic Brake key features are:

* Pre-assembled to save time and money
* Power off activated 24 VDC
* 1.8° and 0.9° PKP motors
* Bipolar or unipolar windings

Visit our web site to learn more about the new PKP Series with Oriental Motor Original Encoders and other stepper motors at http://www.orientalmotor.com/products/stepper-motors/stepper-motor-only.html

ABOUT ORIENTAL MOTOR
Since its founding in Japan in 1885, Oriental Motor has been a world leader in motion systems. For over a century we have concentrated on technological advancement and product design improvement—an emphasis evident in the sophisticated devices we market today. Oriental Motors sales and service network is international, with offices throughout North America, Europe and Asia. Domestically, ORIENTAL MOTOR U.S.A. CORP. was established in 1978.

Featured Product

TUV Rheinland Robot Integrator Program

TUV Rheinland Robot Integrator Program

The industry's first comprehensive Robot Integrator Program saves robot integrators significant time and cost investments by allowing them to mark each cell compliant with ANSI/RIA R15.06 with the TUV Rheinland Mark. As opposed to a traditional certification or an on-site field labeling, TÜV Rheinland's Robot Integrator Program certifies the knowledge and skill-set of robot integrators in addition to testing robotic cells and processes against ANSI/RIA R15.06. This reduces the need for frequent onsite or off site testing and allows manufacturers to apply a single TÜV Rheinland label to multiple cells. The Robot Integrator Program individually assesses a robot integrator's understanding of the ANSI/RIA R15.06 standard along with the ability to consistently produce compliant robot cells. Following the requirements and procedures of the new program will enable robot integrators to produce individually compliant robotic cells under one serialized TÜV Rheinland Mark, which meets the national electric code and allows acceptance by Authorities Having Jurisdiction (AHJ) and end users.