Novotechnik - Angle Sensor for Extreme Environments

Novotechnik U.S. introduces the RSX-7900 Series of angle sensors that provide up to IP69K ingress protection, extremely long life of >100 million movements and ISO13849 PL-d safety compliance in a non-contacting design.

Southborough, MA ... Novotechnik U.S. introduces the RSX-7900 Series of angle sensors that provide up to IP69K ingress protection, extremely long life of >100 million movements and ISO13849 PL-d safety compliance in a non-contacting design.

The sensor is available in six standard measuring ranges with angles from 0 to 60 to 0 to 360 degrees with unrestricted rotation. Resolution is 12-bit across a 4 to 20 mA output with linearity to ±1% at ≥ 90 degrees. Repeatability is 0.2° and update rate is 5 kHz.
Single and dual redundant versions are available and the life specification is valid even under high shock and vibration conditions up to 50 and 20 g respectively. The RSX-7900 Series is available with a CANopen interface.
The RSX-7900 Series sensors offer anodized aluminum housing with a stainless steel shaft for enhanced corrosion protection with salt and spray resistance. Axial and radial shaft loading is up to 300 N thanks to a double row angular contact ball bearing design. The 70 mm diameter sensor has a nominal length of only 35 mm and is available with a wide choice of shaft styles for maximum installation flexibility.
The RSX-7900 Series angle sensors operate from 9 to 34 V DC supply making them ideal for 12 and 24 volt off-highway vehicle and construction equipment applications.

For more information contact Novotechnik U.S., Inc., 155 Northboro Road, Southborough, MA 01772 • Phone: 508-485-2244 • Fax: 508-485-2430 • Web: www.novotechnik.com/rsx79

Featured Product

BLE2 Series Brushless Motor & Driver

BLE2 Series Brushless Motor & Driver

The BLE2 Series replaces our popular BLE Series and continues our brushless motor advantages by featuring an all new compact, high-power and high-efficiency brushless DC motor combined with a Driver that can be digitally set and controlled via external DC voltage or by the front panel. The BLE2 Series can easily compete with larger 3-phase inverter driven motors in many more applications, with built-in simple holding torque function, saving space and increasing performance thanks to the advantages of a brushless motor design. The BLE2 Series has a maximum speed of 4000 r/min, achieving a speed ratio of 1:50 (80 to 4000 r/min). The new motor structure is small than previous models and enables high power and high efficiency while incorporating easy setting, installation and wiring. The new motor connector offers IP66 degree of protection and allows for easy and direct connection between motor and driver with two available orientation of cable outlet direction. Standardized use of stain