Automate 2017 - Glide-Line™ Introduces Glide-Line ZP ZERO PRESSURE ACCUMULATION CONVEYOR

Souderton, PA, March, 2017 - Glide-Line™, manufacturer of the most versatile pallet-handling and multi-strand panel conveyor solutions available in the industry, introduces Glide-Line ZP, Zero Pressure Accumulation Conveyor, an innovation in assembly conveyor technology.

"Glide-Line ZP conveyor is a non-contact, product friendly and elegant solution to solving issues associated with accumulating product. This solution will create significant energy savings, much less wear and tear, and handle products with much more care and control than a traditional accumulation approach." Kevin Mauger, President, Glide-Line


Souderton, PA, March, 2017 - Glide-Line™, manufacturer of the most versatile pallet-handling and multi-strand panel conveyor solutions available in the industry, introduces Glide-Line ZP, Zero Pressure Accumulation Conveyor, an innovation in assembly conveyor technology.

Glide-Line ZP, a gentler, more reliable and energy efficient conveyor solution by eliminating 100% of backpressure caused by accumulation.

With traditional conveyors, there is often backpressure from upstream pallets bumping into each other and stacking up, which can compromise product integrity and quality. In addition, motors running continuously, regardless of actual conveyor requirements cause extra friction, unnecessary wear and tear on the entire system including bearings, belts and motors, effectively reducing the life of the entire system. Continuously running the conveyors also wastes energy.

With Glide-Lines new ZP Zero Pressure Accumulation Conveyor, motors only run when a product approaches and has a permissive from downstream maintaining a gap between products so no back pressure is created. Each accumulation zone is powered by a 24VDC brushless motor and can handle loads up to 200 lbs. each. The motors are daisy-chained to one another and each one uses its own driver card completely with integrated "zero pressure" logic, including inputs for local sensors.

With individually managed accumulation zones, Glide-Lines new Zero Pressure Accumulation Conveyors ensure theres always a gap between products. Integrated zero-pressure logic enables gentle product handling by turning motors on and off as needed, greatly reducing wear and tear on the motors and the conveyor itself. The brushless DC motors used in the ZPA Conveyors are virtually silent and rated for 300,000 hours each. Please plan to visit the Glide-Line booth to see the ZP Zero Pressure Accumulation Conveyor at this years Automate Show, April 3rd - 6th, McCormick Place, Chicago, IL booth #2624 and at the Assembly Technology Show, October 24th - 26th, Rosemont, IL booth # 1411.

Glide-Line is a brand fully owned by the parent company NCC Automated Systems, a 30-year-old food and packaging line integrator. Glide-Line comes to the market with a fresh new customer friendly perspective with faster lead times, flexible designs and an amazing software filling the void for configured conveyor assemblies.


Glide-Line projects contact - Craig Newberry, cnewberry@glide-line.com 215-721-1900 ext. 148
Glide-Line marketing contact - Chris Round, cround@glide-line.com 513-550-2820

Featured Product

ST Robotics Develops the Workspace Sentry for Collaborative Robotics

ST Robotics Develops the Workspace Sentry for Collaborative Robotics

The ST Robotics Workspace Sentry robot and area safety system are based on a small module that sends an infrared beam across the workspace. If the user puts his hand (or any other object) in the workspace, the robot stops using programmable emergency deceleration. Each module has three beams at different angles and the distance a beam reaches is adjustable. Two or more modules can be daisy chained to watch a wider area. "A robot that is tuned to stop on impact may not be safe. Robots where the trip torque can be set at low thresholds are too slow for any practical industrial application. The best system is where the work area has proximity detectors so the robot stops before impact and that is the approach ST Robotics has taken," states President and CEO of ST Robotics David Sands.