New 60mm OD Frameless Brushless Servo Motor Kits from Maxon

With an outer diameter of only 60mm these frameless brushless servo motors are extremely compact.

The new EC 60 Flat Frameless Brushless Servo Motor Kit from Maxon consist of only a rotor and stator - with no bearings or motor shaft. With an outer diameter of only 60mm, these pancake servo motor kits are extremely compact.


Available in size ranges from 70 Watt to 100 Watt, these EC (electronically commutated) frameless slotted motors feature low voltage windings, high pole pair count and are shipped as BLDC frameless motor kits.

These Inner Rotor Slotted Motors feature:
• Low voltage windings
• High accel/decel capabilities
• Low rotor inertia
• High pole pair count
• Lower cost vs. slotless motors

The flat design, high torque output and hollow shaft construction provides plenty of space for cable glands which allows for a high level of integration into OEM applications such as Collaborative & Mobile Robots, AGVs, Exoskeletons and Embedded Robotic Applications.

Information on the EC 60 Flat Frameless Brushless 100 Watt Servo Motor from maxon can be found at:
https://www.maxonmotorusa.com/medias/sys_master/root/8827307491358/EC-60-Flat-Frameless-100W-550153-EN.pdf

For more information, please contact:

EDITORIAL CONTACT:
Warren Osak
sales@electromate.com
Toll Free Phone: 877-737-8698
Toll Free Fax: 877-737-8699
www.electromate.com

Tags: Maxon, BLDC Motor, Servo Motor, Frameless Motor, Brushless Motor, Electromate

Featured Product

ST Robotics Develops the Workspace Sentry for Collaborative Robotics

ST Robotics Develops the Workspace Sentry for Collaborative Robotics

The ST Robotics Workspace Sentry robot and area safety system are based on a small module that sends an infrared beam across the workspace. If the user puts his hand (or any other object) in the workspace, the robot stops using programmable emergency deceleration. Each module has three beams at different angles and the distance a beam reaches is adjustable. Two or more modules can be daisy chained to watch a wider area. "A robot that is tuned to stop on impact may not be safe. Robots where the trip torque can be set at low thresholds are too slow for any practical industrial application. The best system is where the work area has proximity detectors so the robot stops before impact and that is the approach ST Robotics has taken," states President and CEO of ST Robotics David Sands.