Compact Hydraulic/Pneumatic Position Sensors
TH1 Series is designed to be used inside or outside a cylinder with plug-in- and screw- flange versions respectively. A magnetic ring-shaped marker is affixed to your application’s moving cylinder and moves up and down the TM1 rod without contact.
Southborough, MA - Novotechnik U.S. introduces the TM1 Series of magnetostrictive linear hydraulic and pneumatic position sensors with compact housing. TM1 meets or exceeds 11 EMC standards.
TH1 Series is designed to be used inside or outside a cylinder with plug-in- and screw- flange versions respectively. A magnetic ring-shaped marker is affixed to your application's moving cylinder and moves up and down the TM1 rod without contact.
TM1 Series stroke lengths are from 50 to 2,000 mm in 25 mm steps. Operating pressure is up to 5,076 psi (350 bar) with peaks to 6,526 psi (450 bar). Both plug-in and screw type flange models are available.
Other key specifications for TM1 include absolute linearity of ≤ 0.04% F.S. (min. 0.3 mm) and repeatability of ≤ ±0.1 mm. TM1 Series sensors meet or exceed ISO, E1, and CISPR EMC standards. Output options include voltage, current, CANopen, and CAN SAE J1939.
Ingress protection is to IP 69, shock and vibration 100 g and 20 g respectively. Operating temperature range is to -40 to +105°C.
Contact Novotechnik U.S.: Phone: 508-485-2244 • E-mail: info@novotechnik.com •
Web: www.novotechnik.com/tm1
Featured Product
REIKU's Cable Saver™ - The Most Versatile Modular Robotic Cable Management Solution
REIKU's Cable Saver™ Solution eliminates downtime, loss of revenue, expensive cable and hose replacement costs, maintenance labor costs. It's available in three sizes 36, 52 and 70 mm.
All of the robots cables and hoses are protected when routed through the Cable Saver™ corrugated tubing.The Cable Saver™ uses a spring retraction system housed inside the Energy Tube™ to keep this service loop out of harms way in safe location at the rear of the Robot when not required. The Cable Saver™ is a COMPLETE solution for any make or model of robot. It installs quickly-on either side of the robot and has been tested to resist over 15 million repetitive cycles.
REIKU is committed to providing the most modular, effective options for ensuring your robotic components operate without downtime due to cable management.
www.CableSaver.com
